[SCore-users-jp] Re: [SCore-users] netwrok restart

[kameyama ＠ pccluster.org]

In article <2b882deb11a904641de188dbe7168d8c ＠ streamline-computing.com> Atsushi HORI <hori ＠ streamline-computing.com> wrotes:
> On 2005/04/19, at 21:53, Gabriel Dimitriu wrote:
> 
> > I had put this in ifcfg-eth0 and I rerun all servers
> > and nothing was happening.Did I done corect the
> > modification ?

The max_interrupt_work is parameter of network driver module.
You must modify /etc/modules.conf for example, if you use eepro100 network
driver, please add following line in /etc/modules.conf:
    options eepro100 max_interrupt_work=100000

> > I mention that the "sceptic -v -g pcc" works fine, so
> > if it was a configurantion problem sceptic should give
> > an error, isn't it ?
> 
> Well, PM, which is the name of low-level communication library inside 
> SCore, has a totally different protocol from well-known protocols such 
> as TCP/IP. Therefor PM stresses Ethernet driver quite a different way. 
> Your problem happens because of this PM protocol.

So if you want to work PM/ethernet better, you may modifies
NIC driver setting and pm-ethernet.conf parameters.
(These settings are depended NIC hardware and NIC device driver.)

                       from Kameyama Toyohisa
_______________________________________________
SCore-users mailing list
SCore-users ＠ pccluster.org
http://www.pccluster.org/mailman/listinfo/score-users