[SCore-users-jp] [SCore-users] Re: Help: Trouble in installing compute node

[Huiqun Zhou]

I have created module-info, as for pcitable, I don't know where I can get the
VendorID and DeviceID for the NIC. I don't know if I can get any useful information
from D-Link's tech support.

Thanks!

Huiqun Zhou


----- Original Message ----- 
From: <kameyama ＠ pccluster.org>
To: "Huiqun Zhou" <hqzhou ＠ nju.edu.cn>
Cc: <kameyama ＠ pccluster.org>; <SCore-users ＠ pccluster.org>
Sent: Wednesday, June 25, 2003 6:29 PM
Subject: Re: Help: Trouble in installing compute node


> In article <002201c33b01$6affa210$1a00a8c0 ＠ goofy> "Huiqun Zhou" <hqzhou ＠ nju.edu.cn> wrotes:
> > After tracing back the archive of the mailing list, we at last created the floppy
> > following the instructions for adding e1000 NIC driver into the boot image in 
> > the mail posted by Kameyama-san in last October. Currently, we are using D-Link
> > 550T Gigabit NIC on all of our compute nodes. The driver for the card has been 
> > compiled and linked with Score kernel source.
> 
> Probably, you cannot load or fail to load D-Link 550T driver
> on the compute hosts.
> Please look at console3 (ALT-shift-F3, installer log)
> and console 4 (ALT-shift-F4, kernel log).
> 
> If D-Link 550T driver is not try to loaded (in consoile 3),
> you must add the driver's information into module-info and pcitable.
> (Note that redhat 7.x dose not support D-Link 550T driver.
> So you must wriite driver's information byy yourself.)
> 
> If D-Link 550T driver loadded is failed, you may compile
> the driver for the boot floppy.
> 
>                        from Kameyama Toyohisa
> 
_______________________________________________
SCore-users mailing list
SCore-users ＠ pccluster.org
http://www.pccluster.org/mailman/listinfo/score-users