[SCore-users-jp] pmテスト

[Kazuhiro Shimada]

関東学院大の島田と申します。

Pmのテストをすると以下のようにエラーが出るのですが、これはNICが対応していな
いということでしょうか。。。Broadcom BCM5708 Gigabit Ethernetです。

[root ＠ s104-010 shimada]# /etc/rc.d/init.d/pm_ethernet start
Starting PM/Ethernet: epmctl IOCTL failed(16) Trying old style....device:
eth0
etherpmctl: ERROR on unit 0: "Operation not supported(95)" Check dmesg log!!
1 PM/ethernet device is enables.

Dmesgの最後の方は以下のようになってます。

bnx2: eth0: using MSI
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex i2c /dev entries driver
lp: driver loaded but no devices found
eth0: no IPv6 routers present
Installing knfsd (copyright (C) 1996 okir ＠ monad.swb.de).
crt: Checkpoint/Restart for Threads (CRT) module version 1.0.0.
pm_ethernet_loader: no version for "struct_module" found: kernel tainted.
PM/Ethernet-LD $Id: pm_ethernet_loader.c,v 1.3 2006/12/19 02:32:02 kameyama
Exp $ PM/Ethernet-LD Loaded pm_memory:PM memory support pm_memory:Register
pm_memory as major(123)
PM/Ethernet-nkp: "$Id: pm_ethernet_dev_nkp.c,v 1.3 2006/12/19 02:32:01
kameyama Exp $"
PM/Ethernet-nkp: register pm-ethernet device as major(122)
pm-ethernet0: 16 contexts using 4096KB MEM, maxunit=4, maxnodes=512,
mtu=1468, eth0.
pm_shmem:pmshmem: version = $Id: pm_shmem.c,v 1.6 2007/02/27 06:20:56
kameyama Exp $
pm_shmem:pmshmem_init: register pm_shmem as major(124)
htt_xbe[22757]: segfault at 0000000000000209 rip 0000003a96d2eed0 rsp
00000000409ffe78 error 4


謹言
----------------------------------
関東学院大学工学部電気電子情報工学科
島田和宏
----------------------------------