[SCore-users-jp] Re: [SCore-users] Help with an error message

[James O'Dell]

Here is my scorehosts.db


/*
 *       SCore 5.0 scorehosts.db
 *		generated by PCCC EIT 5.2
 */

/* PM/Myrinet */
myrinet		type=myrinet \
		-firmware:file=/opt/score/share/lanai/lanai.mcp \
		-config:file=/opt/score/etc/pm-myrinet.conf

/* PM/Myrinet */
myrinet2k	type=myrinet2k \
		-firmware:file=/opt/score/share/lanai/lanaiM2k.mcp \
		-config:file=/opt/score/etc/pm-myrinet.conf

/* PM/Ethernet */
ethernet	type=ethernet \
		-config:file=/opt/score/etc/pm-ethernet.conf
gigaethernet	type=ethernet \
		-config:file=/opt/score/etc/pm-gig.conf
/* PM/Agent */
udp		type=agent -agent=pmaudp \
		-config:file=/opt/score/etc/pm-udp.conf

/* RHiNET */
rhinet		type=rhinet \
		-firmware:file=/opt/score/share/rhinet/phu_top_0207a.hex \
		-config:file=/opt/score/etc/pm-rhinet.conf
##
##
#include "/opt/score//etc/ndconf/0"
#include "/opt/score//etc/ndconf/1"
#include "/opt/score//etc/ndconf/2"
#include "/opt/score//etc/ndconf/3"
#include "/opt/score//etc/ndconf/4"
#include "/opt/score//etc/ndconf/5"
#include "/opt/score//etc/ndconf/6"
#include "/opt/score//etc/ndconf/7"
#include "/opt/score//etc/ndconf/8"
#include "/opt/score//etc/ndconf/9"
#include "/opt/score//etc/ndconf/10"
#include "/opt/score//etc/ndconf/11"
##
#define MSGBSERV	msgbserv=(kansas-fe.cascv.brown.edu:8764)

bio-1.cascv.brown.edu	HOST_0 network=ethernet group=_scoreall_,100Mb
smp=2 MSGBSERV
bio-2.cascv.brown.edu	HOST_1 network=ethernet group=_scoreall_,100Mb
smp=2 MSGBSERV
bio-3.cascv.brown.edu	HOST_2 network=ethernet group=_scoreall_,100Mb
smp=2 MSGBSERV
bio-4.cascv.brown.edu	HOST_3 network=ethernet group=_scoreall_,100Mb
smp=2 MSGBSERV
bio-5.cascv.brown.edu	HOST_4 network=ethernet,gigaethernet
group=_scoreall_,100Mb,gige smp=2 MSGBSERV
bio-6.cascv.brown.edu	HOST_5 network=ethernet,gigaethernet
group=_scoreall_,100Mb,gige smp=2 MSGBSERV
bio-7.cascv.brown.edu	HOST_6 network=ethernet,gigaethernet
group=_scoreall_,100Mb,gige smp=2 MSGBSERV
bio-8.cascv.brown.edu	HOST_7 network=ethernet,gigaethernet
group=_scoreall_,100Mb,gige smp=2 MSGBSERV
bio-9.cascv.brown.edu	HOST_8 network=ethernet,gigaethernet
group=_scoreall_,100Mb,gige smp=2 MSGBSERV
bio-10.cascv.brown.edu	HOST_9 network=ethernet,gigaethernet
group=_scoreall_,100Mb,gige smp=2 MSGBSERV
bio-11.cascv.brown.edu	HOST_10 network=ethernet,gigaethernet
group=_scoreall_,100Mb,gige smp=2 MSGBSERV
bio-12.cascv.brown.edu	HOST_11 network=ethernet,gigaethernet
group=_scoreall_,100Mb,gige smp=2 MSGBSERV


Here is my pm-gig.conf file:
unit 1
maxnsend 8
# Not connected yet
#0 00:30:48:23:70:CF bio-1.cascv.brown.edu
#1 00:30:48:23:70:B1 bio-2.cascv.brown.edu
#2 00:30:48:23:70:D9 bio-3.cascv.brown.edu
#3 00:30:48:23:70:E3 bio-4.cascv.brown.edu
4 00:30:48:23:6E:2B bio-5.cascv.brown.edu
5 00:30:48:23:3F:05 bio-6.cascv.brown.edu
6 00:30:48:23:3E:51 bio-7.cascv.brown.edu
7 00:30:48:23:3E:3D bio-8.cascv.brown.edu
8 00:30:48:23:70:EB bio-9.cascv.brown.edu
9 00:30:48:23:6F:05 bio-10.cascv.brown.edu
10 00:30:48:23:6E:55 bio-11.cascv.brown.edu
11 00:30:48:23:70:E1 bio-12.cascv.brown.edu

I have disabled the first four hosts as we don't have enough room in our
switch for them.

I have also edited the pm_ethernet file to start and stop eth1. When I
run "pm_ethernet stop" and then run "pm_ethernet start" I get the
messages below.

[root ＠ bio-12 init.d]# ./pm_ethernet stop
Stopping PM/Ethernet: device: eth0
device: eth1

[root ＠ bio-12 init.d]# ./pm_ethernet start
n Starting PM/Ethernet: 
device: eth0
device: eth1
etherpmctl: ERROR on unit 1: "Link has been severed(67)" Check dmesg
log!!

Many thanks for your help!

Jim

On Mon, 2003-03-17 at 21:30, Atsushi HORI wrote:
> Hi,
> 
> >1) edit the pm_ehternet file on the nodes to start the gig interface.
> >2) Add a file pm-gig.conf to the /opt/score/etc directory. This file has
> >the MAC addresses of the gig cards.
> >3) Edit the scoredhosts.db file to define gigaethernet,include bu
> >pm-gig.conf file and define the nodes to have gigabit ethernet.
> >4) Reboot the server and the compute hosts.
> 
> And you must do the following on all cluster hosts;
> 
> 5) /etc/rc.d/init.d/pm_ethernet stop
>    Edit /etc/rc.d/init.d/pm_ethernet
>    /etc/rc.d/init.d/pm_ethernet start
> 
> The pm_sthernet script binds PM unit number and Linux ethernet device 
> (eth0, eth1, ...).
> 
> >Does anyoen know what the following messages mean?
> >I got them whil running:
> >
> >scstest -network gigaethernet
> >
> >
> >bio-11(-1) pmAssociateNodes: Invalid argument(22)
> >bio-12(-1) pmAssociateNodes: Invalid argument(22)
> 
> Send me the files /opt/score/etc/scorehosts.db and 
> /opt/score/etc/pm-gig.conf.
> 
> ----
> Atsushi HORI
> Swimmy Software, Inc.
> 
_______________________________________________
SCore-users mailing list
SCore-users ＠ pccluster.org
http://www.pccluster.org/mailman/listinfo/score-users