In article <web-2021104 ＠ deform.com> "Jim Giuliani" <jgiuliani ＠ deform.com> wrotes:
> >Please create boot floppy include Pro/1000 driver.
> >Or please install SCore without EIT.
>
> Do you have a written proceedure on how to create the new
> boot floppy with the Pro/1000 driver?
1. Create boot floppy by EIT.
2. mount this floppy.
# mount /dev/fd0 /mnt/floppy
3. extract initrd image and mount it.
# gunzip < initrd.img > /tmp/initrd
# mkdir /mnt/tmp
# mount -o loop /tmp/initrd /mnt/tmp
4. extract modules cpio file
# cd /tmp
# mkdir work
# cd work
# zcat /mnt/tmp/modules/modules.cgz | cpio --extract -d
5. extract pro/1000 driver.
Pro/1000 driver is included in CD-ROM.
# mkdir /mnt/tmp2
# mount -o loop /mnt/cdrom/setup/RedHat/images/drvnet.img /mnt/tmp2
# mkdir /tmp/work2
# cd /tmp/work2
# zcat /mnt/tmp2/modules.cgz | cpio --extract -d
6. copy e1000 driver to modules cpio file
# cp */e1000.o /tmp/work/*/
# cd /tmp/work
# find * -type f | cpio --quiet -H crc -o | gzip -9 > /mnt//tmp/modules/modules.cgz
7. edit other file
# cat >> module-info
e1000
eth0
"Intel EtherExpress/1000 gigabit"
^D
# grep e1000 /mnt/tmp2/pcitable >> pcitable
8. umount initrd and copy back to floppy
# umount /mnt/tmp2
# umount /mnt/tmp
# gzip -9 /tmp/initrd
# cp /tmp/initrd.gz /mnt/floppy/initrd.img
If your floppy is full, you must remove another driver in modules cpio file.
from Kameyama Toyohisa
_______________________________________________
SCore-users mailing list
SCore-users ＠ pccluster.org
http://www.pccluster.org/mailman/listinfo/score-users