$ rpminit comp0 shmem0 Success: Nothing is printed Failure: Error and dump messages are printedIf this test fails, please read the Troubleshooting section.
$ rpmtest comp0 shmem0 -dest 0 -ping Success: Two numbers similar to "8 1.2269e-05" are printed The first number is the data size (in bytes) The second number is the latency (in seconds) Failure: Error and dump messages are printedIf this test fails, please read the Troubleshooting section.
$ rpmtest comp0 shmem1 -replyIssue the following commands in another window on the server host:
$ rpmtest comp0 shmem0 -dest 1 -ping Results should be the same as the loopback testWhen the test finishes, do not forget to kill the first
pmtest
process because it is in an infinite loop.
$ rpmtest comp0 shmem1 -vreplyIssue the following commands in another window on the server host:
$ rpmtest comp0 shmem0 -dest 1 -vread Results should be the same as the loopback testWhen the test finishes, do not forget to kill the
pmtest
process because the it is in an infinite loop./dev/pmshmem/*
has not been created.
/dev/pmshmem/*
are not correct.