Myrinet2000 Switch Configurations
The Easy Installation Tool automatically creates a Myrinet 2000 switch configuration
file for PM/Myrinet. Myrinet2000 switches are built from switch enclosures(E16, E32, E64, and E128), Line switch cards(SW16) and SPINE cards(SPINE).
In order to build Myrinet2000 or Myrinet XP cluster,
after you recongnize your switch hard ware, lease connect the Myrinet network using
one of the following allowed connections:
If you want to build a cluster of more than 128 compute hosts,
please contact us using SCore Users ML.
Myrinet2000 SAN switch:
When you use Myrinet2000 SAN switch, please be sure jumper switch on line switch card: speed setting and HA feature. When you use SCore,the default setting for HA feature must be off.
Myrinet2000 SAN Card:
When you use Myrinet 2000 cards, please be sure trimmer switch on the cards:
speed setting.
Configuration file: 8
Using one E16, E32, E64 or E128 with one SW16 card:
Configuration file: SPINE-LINE, LINE-LINE and 16
Using one SPINE card and one SW16 card with E16 switch enclosures,
using two SW16 cards with E16 switch enclosures, or
using two SW16 card with E32, E64 or E128 switch enclosures.
Configuration file: 32
Using four SW16 card with E32, E64 or E128 switch enclosures.
Configuration file: 64
Using eight SW16 card with E64 or E128 switch enclosures.
Configuration file: 128
Using sixteen SW16 card with E128 switch enclosures.
- CREDIT
- This document is a part of the SCore cluster system software
developed at PC Cluster Consortium, Japan.
Copyright (C) 2003 PC Cluster Consortium.