[SCore-users-jp] Re: [SCore-users] GM availability on SCore, when ???
Emile CARCAMO
emile.carcamo at nec.fr
Thu Jan 2 19:46:39 JST 2003
s-sumi at flab.fujitsu.co.jp said:
> Could you let me know your measurement envinronment?
> 1) Which Myrinet Cards are you using, PCI64B or PCI64C?
> 2) How about your host environment, CPU, chipset and memory?
Dear Shinji-san,
Concerning the Myrinet card type, I'm not 100% sure of it
but the nodes are Express5800 120rc1 model (this info may
help, just in case). I've also enclosed some infos like :
memory available per node, lspci -vv (run as root !), the
contents of /proc/cpuinfo. Let me know if you need some
more inputs from me ?
Thanks again for your help, and best regards.
--
Emile_CARCAMO NEC European http://www.ess.nec.de
System Engineer Supercomputer mailto:emile.carcamo at nec.fr
Systems France GSM mailto:emile.carcamo at orange.fr
(+33)1-3930-6601 FAX
(+33)1-3930-6613 PHONE / Your mouse has moved. Windows NT must be restarted \
(+33)6-8063-7003 GSM \ for the change to take effect. Reboot now? [ OK ] /
-------------------------------------------------------------------------------
<sparepc.ess.nec.fr>[ecarcamo]<115>rsh-all -g essfrance dmesg | grep Memory
node01.ess.nec.fr: Memory: 899708k/917504k available (1676k kernel code,
17392k reserved, 500k data, 232k init, 0k highmem)
node05.ess.nec.fr: Memory: 899724k/917504k available (1676k kernel code,
17392k reserved, 500k data, 232k init, 0k highmem)
node02.ess.nec.fr: Memory: 899708k/917504k available (1676k kernel code,
17392k reserved, 500k data, 232k init, 0k highmem)
node03.ess.nec.fr: Memory: 899708k/917504k available (1676k kernel code,
17392k reserved, 500k data, 232k init, 0k highmem)
node04.ess.nec.fr: Memory: 899708k/917504k available (1676k kernel code,
17392k reserved, 500k data, 232k init, 0k highmem)
node06.ess.nec.fr: Memory: 899724k/917504k available (1676k kernel code,
17392k reserved, 500k data, 232k init, 0k highmem)
node07.ess.nec.fr: Memory: 899708k/917504k available (1676k kernel code,
17392k reserved, 500k data, 232k init, 0k highmem)
<sparepc.ess.nec.fr>[ecarcamo]<116>
-------------------------------------------------------------------------------
00:00.0 Host bridge: Intel Corp. e7500 DRAM Controller (rev 03)
Subsystem: Intel Corp.: Unknown device 3415
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:00.1 Class ff00: Intel Corp. e7500 DRAM Controller Error Reporting (rev 03)
Subsystem: Intel Corp.: Unknown device 3415
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:03.0 PCI bridge: Intel Corp. e7500 HI_C Virtual PCI-to-PCI Bridge (F0) (rev
03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00003fff
Memory behind bridge: fe900000-febfffff
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:03.1 Class ff00: Intel Corp. e7500 HI_C Virtual PCI-to-PCI Bridge (F1) (rev
03)
Subsystem: Intel Corp.: Unknown device 3415
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub (rev 02) (prog-if 00
[UHCI])
Subsystem: Intel Corp.: Unknown device 3415
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 4020 [size=32]
00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub (rev 02) (prog-if 00
[UHCI])
Subsystem: Intel Corp.: Unknown device 3415
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 4000 [size=32]
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 42) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fc800000-fe8fffff
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801CA ISA Bridge (LPC) (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801CA IDE U100 (rev 02) (prog-if 8a
[Master SecP PriP])
Subsystem: Intel Corp.: Unknown device 3415
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at <unassigned> [size=8]
Region 1: I/O ports at <unassigned> [size=4]
Region 2: I/O ports at <unassigned> [size=8]
Region 3: I/O ports at <unassigned> [size=4]
Region 4: I/O ports at 03a0 [size=16]
Region 5: Memory at 80000000 (32-bit, non-prefetchable) [disabled] [size=1K]
00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus (rev 02)
Subsystem: Intel Corp.: Unknown device 3415
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0580 [size=32]
01:0c.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
(prog-if 00 [VGA])
Subsystem: Intel Corp.: Unknown device 3415
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 10
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 1000 [size=256]
Region 2: Memory at fe6f0000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at fe6c0000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 03) (prog-if 20
[IO(X)-APIC])
Subsystem: Intel Corp.: Unknown device 3415
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at febe0000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0,
DMOST=0, DMCRS=0, RSCEM-
02:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 03) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64, cache line size 10
Bus: primary=02, secondary=04, subordinate=04, sec-latency=48
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fea00000-feafffff
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] PCI-X non-bridge device.
Command: DPERE+ ERO+ RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0,
DMOST=0, DMCRS=0, RSCEM-
02:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 03) (prog-if 20
[IO(X)-APIC])
Subsystem: Intel Corp.: Unknown device 3415
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at febf0000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0,
DMOST=0, DMCRS=0, RSCEM-
02:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 03) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64, cache line size 10
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe900000-fe9fffff
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] PCI-X non-bridge device.
Command: DPERE+ ERO+ RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0,
DMOST=0, DMCRS=0, RSCEM-
03:07.0 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller
(rev 01)
Subsystem: Intel Corp.: Unknown device 3415
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (63750ns min), cache line size 10
Interrupt: pin A routed to IRQ 30
Region 0: Memory at fe940000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 2040 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk+ DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device.
Command: DPERE- ERO+ RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0,
DMOST=0, DMCRS=0, RSCEM-
Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
03:07.1 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller
(rev 01)
Subsystem: Intel Corp.: Unknown device 3415
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (63750ns min), cache line size 10
Interrupt: pin B routed to IRQ 31
Region 0: Memory at fe960000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 2000 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk+ DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device.
Command: DPERE- ERO+ RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0,
DMOST=0, DMCRS=0, RSCEM-
Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
04:07.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
Subsystem: Intel Corp.: Unknown device 3415
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (10000ns min, 6250ns max), cache line size 10
Interrupt: pin A routed to IRQ 50
BIST result: 00
Region 0: I/O ports at 3400 [disabled] [size=256]
Region 1: Memory at fea30000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:07.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
Subsystem: Intel Corp.: Unknown device 3415
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (10000ns min, 6250ns max), cache line size 10
Interrupt: pin B routed to IRQ 49
BIST result: 00
Region 0: I/O ports at 3000 [disabled] [size=256]
Region 1: Memory at feae0000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fea40000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-------------------------------------------------------------------------------
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) XEON(TM) CPU 2.40GHz
stepping : 4
cpu MHz : 2392.975
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 4771.02
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) XEON(TM) CPU 2.40GHz
stepping : 4
cpu MHz : 2392.975
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 4784.12
-------------------------------------------------------------------------------
More information about the SCore-users
mailing list