[SCore-users] Network Trunking
Shinji Sumimoto
s-sumi at bd6.so-net.ne.jp
Sun May 19 09:54:57 JST 2002
Hi.
Have you set the network option when you run your application?
As described in the document
(http://www.pccluster.org/score/dist/score/html/en/reference/pm/ether-trunking.html),
you need to set network name, such as ethernet-x2, ethernet-x3, in
order to use network trunking.
This is also needed when you try to run your application program:
For example,
% scrun -nodes=4x1,network=ethernet-x2 ./a.out
The scrun command option is described in
http://www.pccluster.org/score/dist/score/html/en/man/man1/scrun.html.
If you have already done, please let us know more information, such as
your cluster hardware configuration, such as scorehoss.db,
configuration file setting.
Shinji.
From: Chen Hao <chen at mdl.ipc.pku.edu.cn>
Subject: [SCore-users] Network Trunking
Date: Sat, 18 May 2002 00:33:07 +0800 (CST)
> I build a small cluster with score 5.0 in my lab, and I install two
> ethernet card(3c905B) in one node. But after I complete configuration
> following by the documents, I found there's no differences between 2 NICs
> trunking network and single network because there is always only one NIC
> works. what's the matter?
>
> _______________________________________________
> SCore-users mailing list
> SCore-users at pccluster.org
> http://www.pccluster.org/mailman/listinfo/score-users
>
-----
Shinji Sumimoto E-Mail: s-sumi at bd6.so-net.ne.jp
More information about the SCore-users
mailing list