From kameyama ＠ pccluster.org  Thu Jan 20 13:40:13 2011
From: kameyama ＠ pccluster.org (Kameyama Toyohisa)
Date: Thu, 20 Jan 2011 13:40:13 +0900
Subject: [SCore-users-jp] =?iso-2022-jp?b?RndkOiBTQ29yZTdCYXRhNSA=?=
 =?iso-2022-jp?b?GyRCJE5KQk5zPEI5VCRHRGQ7XyQ5JGs4PT5dJEskRCQkJEYbKEIgLSA=?=
 =?iso-2022-jp?b?GyRCPEFMZBsoQiAt?=
Message-ID: <4D37BCAD.9060308@pccluster.org>

亀山です.

すみません.
間違って削除してしまったので, 転送します.

Kameyama Toyohisa

-------- Original Message --------
Subject: SCore7Bata5 の並列実行で停止する現象について - 質問 -
Date: Thu, 20 Jan 2011 13:20:18 +0900 (JST)
From: 鈴木 陽介 <yosukeys ＠ yahoo.co.jp>
To: score-users-jp ＠ pccluster.org
CC: kameyama ＠ pccluster.org, howtoget_m_meg1116 ＠ yahoo.co.jp

亀山様
神奈川大学　鈴木陽介です。

SCore7Bata5の並列実行で停止する現象について-質問-

http://www.pccluster.org/pipermail/score-users-jp/2010-October/003608.html

最新バージョンにバージョンアップすれば、この問題は
解決しますか？

ただし、SCore7Bata5のバージョンで、何か修正パッチを
当てれば、改善するのであれば、その方法を教えてください。

大学側で実行した場合のログは以下のとおりです。
＜うまくいった場合＞

[root ＠ server3 sc01]# scrun -nodes=4x1 ./a.out
SCore (7.Beta.5) Connected
SCORE{1} 4 nodes (4x1) ready.
time = 22.740914 seconds, iteration = 133, performance =
440.971438 MFLOPS

＜失敗した場合＞

[root ＠ server3 sc01]# scrun -nodes=16x1 ./a.out
SCore (7.Beta.5) Connected
SCORE{1} 16 nodes (16x1) ready.

-------------------------------
これ以降は、マシンがフリーズ状態のようです。
応答がありません。コントロール+Cでキャンセルした場合
は、計算ホストの一部の再起動が必要です。

なお、実行したプログラムは（P44-45　Linuxで並列処理をし
よう　第2版）を使っています。


以　上























--------------------------------------
Get the new Internet Explorer 8 optimized for Yahoo! JAPAN
http://pr.mail.yahoo.co.jp/ie8/



From kameyama ＠ pccluster.org  Thu Jan 20 13:59:51 2011
From: kameyama ＠ pccluster.org (Kameyama Toyohisa)
Date: Thu, 20 Jan 2011 13:59:51 +0900
Subject: [SCore-users-jp] =?iso-2022-jp?b?RndkOiBTQ29yZTdCYXRhNSA=?=
 =?iso-2022-jp?b?GyRCJE5KQk5zPEI5VCRHRGQ7XyQ5JGs4PT5dJEskRCQkJEYbKEIgLSA=?=
 =?iso-2022-jp?b?GyRCPEFMZBsoQiAt?=
In-Reply-To: <4D37BCAD.9060308@pccluster.org>
References: <4D37BCAD.9060308@pccluster.org>
Message-ID: <4D37C147.1010808@pccluster.org>

亀山です.

(01/20/11 13:40), Kameyama Toyohisa Wrote:
> SCore7Bata5の並列実行で停止する現象について-質問-
> 
> http://www.pccluster.org/pipermail/score-users-jp/2010-October/003608.html
> 
> 最新バージョンにバージョンアップすれば、この問題は
> 解決しますか？

多分, SCore 7.0 以降でしたら動くと思います.
(前の mail の段階で修正していたのですが,
思っていた修正箇所と違っていたような...)

> ただし、SCore7Bata5のバージョンで、何か修正パッチを
> 当てれば、改善するのであれば、その方法を教えてください。

多分. このバグだけに限定すれば, device driver だけ変更すれば動くと思いますが...
score7-src/SCore/pmx/arch/ethernet/driver/linux2_6/pmx_ethernet_main.c
の patch は

http://escore.cvs.sourceforge.net/viewvc/escore/score7-src/SCore/pmx/arch/ethernet/driver/ethernet/linux2_6/pmx_ethernet_main.c?r1=1.49&r2=1.45&view=patch
で入手できます.

Kameyama Toyohisa


From kameyama ＠ pccluster.org  Fri Jan 21 08:54:11 2011
From: kameyama ＠ pccluster.org (Kameyama Toyohisa)
Date: Fri, 21 Jan 2011 08:54:11 +0900
Subject: [SCore-users-jp]
 =?iso-2022-jp?b?GyRCI1MjYyNvI3IjZSM3ISUjMCElGyhC?=
 =?iso-2022-jp?b?GyRCIzEkTiUkJXMlOSVIITwlaz5yN28kSyREJCQkRhsoQiAtIA==?=
 =?iso-2022-jp?b?GyRCPEFMZBsoQiAt?=
In-Reply-To: <20110120151417.2425.qmail@web2908.mail.tnz.yahoo.co.jp>
References: <20110120151417.2425.qmail@web2908.mail.tnz.yahoo.co.jp>
Message-ID: <4D38CB23.3000703@pccluster.org>

亀山です.

(01/21/11 00:14), 鈴木 陽介 Wrote:
> Ｓｃｏｒｅ７．０．１のインストール条件について-質問-
> 
> ＣｅｎｔＯＳのバージョンは５．５でないといけませんか？
> 現状５．４　Ｆｉｎａｌです。

大丈夫だと思います.
最悪, source からコンパイルすれば確実ですが, 多分,
rpm で install できると思います.

Kameyama Toyohisa


From yosukeys ＠ yahoo.co.jp  Fri Jan 21 18:35:20 2011
From: yosukeys ＠ yahoo.co.jp (=?ISO-2022-JP?B?GyRCTmtMWhsoQiAbJEJNWzJwGyhC?=)
Date: Fri, 21 Jan 2011 18:35:20 +0900 (JST)
Subject: [SCore-users-jp] =?iso-2022-jp?b?GyRCJVElQyUxITwlOBsoQiBzY29yZTcu?=
 =?iso-2022-jp?b?QmV0YS41LWNvbW1vbi03LkJldGEuNS0xLng4Nl82NCAbJEIkKyRpGyhC?=
 =?iso-2022-jp?b?GyRCJE4lVSUhJSQlayRINiU5ZyQ3JEYkJCReJDkhIyFJJSglaSE8GyhC?=
 =?iso-2022-jp?b?GyRCJEskRCQkJEYbKEI=?=
Message-ID: <20110121093520.54647.qmail@web2911.mail.tnz.yahoo.co.jp>

亀山様
神奈川大学　鈴木陽介です。

御指導いただいたとおり、以下のコマンドを実行しましたが

sh ./bininstall -server

”パッケージ score7.Beta.5-common-7.Beta.5-1.x86_64 から
のファイルと競合しています。”とエラーが発生して
インストールが強制終了してしまいます。

ログは以下のとおりです。どうしたら、よろしいでしょうか？



[root ＠ server3 rpm.rhel5.x86_64]# sh ./bininstall -server
準備中...               
########################################### [100%]
        ファイル /opt/score/bin (パッケージ
score7.0.0-common-7.0.0-1.x86_64 
から) は、パッケージ
score7.Beta.5-common-7.Beta.5-1.x86_64 
からのファイルと競合しています。
        ファイル /opt/score/cgi-bin (パッケージ
score7.0.0-common-7.0.0-1.x86_64 
から) は、パッケージ
score7.Beta.5-common-7.Beta.5-1.x86_64 
からのファイルと競合しています。
        ファイル /opt/score/doc (パッケージ
score7.0.0-common-7.0.0-1.x86_64 
から) は、パッケージ
score7.Beta.5-common-7.Beta.5-1.x86_64 
からのファイルと競合しています。
        ファイル /opt/score/etc (パッケージ
score7.0.0-common-7.0.0-1.x86_64 
から) は、パッケージ
score7.Beta.5-common-7.Beta.5-1.x86_64 
からのファイルと競合しています。
        ファイル /opt/score/install (パッケージ
score7.0.0-common-7.0.0-1.x86_64 
から) は、パッケージ
score7.Beta.5-common-7.Beta.5-1.x86_64 
からのファイルと競合しています。
        ファイル /opt/score/lib (パッケージ
score7.0.0-common-7.0.0-1.x86_64 
から) は、パッケージ
score7.Beta.5-common-7.Beta.5-1.x86_64 
からのファイルと競合しています。
        ファイル /opt/score/libexec (パッケージ
score7.0.0-common-7.0.0-1.x86_64 
から) は、パッケージ
score7.Beta.5-common-7.Beta.5-1.x86_64 
からのファイルと競合しています。
        ファイル /opt/score/modules (パッケージ
score7.0.0-common-7.0.0-1.x86_64 
から) は、パッケージ
score7.Beta.5-common-7.Beta.5-1.x86_64 
からのファイルと競合しています。
        ファイル /opt/score/mpi (パッケージ
score7.0.0-common-7.0.0-1.x86_64 
から) は、パッケージ
score7.Beta.5-common-7.Beta.5-1.x86_64 
からのファイルと競合しています。
        ファイル /opt/score/sbin (パッケージ
score7.0.0-common-7.0.0-1.x86_64 
から) は、パッケージ
score7.Beta.5-common-7.Beta.5-1.x86_64 
からのファイルと競合しています。
        ファイル /opt/score/share (パッケージ
score7.0.0-common-7.0.0-1.x86_64 
から) は、パッケージ
score7.Beta.5-common-7.Beta.5-1.x86_64 
からのファイルと競合しています。
        ファイル /opt/score/test (パッケージ
score7.0.0-common-7.0.0-1.x86_64 
から) は、パッケージ
score7.Beta.5-common-7.Beta.5-1.x86_64 
からのファイルと競合しています。
[root ＠ server3 rpm.rhel5.x86_64]# sh ./bininstall -server





--------------------------------------
Get the new Internet Explorer 8 optimized for Yahoo! JAPAN
http://pr.mail.yahoo.co.jp/ie8/


From yosukeys ＠ yahoo.co.jp  Sat Jan 22 07:51:39 2011
From: yosukeys ＠ yahoo.co.jp (=?ISO-2022-JP?B?GyRCTmtMWhsoQiAbJEJNWzJwGyhC?=)
Date: Sat, 22 Jan 2011 07:51:39 +0900 (JST)
Subject: [SCore-users-jp] =?iso-2022-jp?b?YmluaW5zdGFsbCAbJEIlOSUvJWobKEI=?=
 =?iso-2022-jp?b?GyRCJVclSCROSlQ9OCRyJDckRiEiJSQlcyU5JUghPCVrJTMlXiVzGyhC?=
 =?iso-2022-jp?b?GyRCJUk8QjlUO34kTiUoJWkhPCFJNiU5ZyUoJWkhPCFJJHIyc0hyGyhC?=
 =?iso-2022-jp?b?GyRCJDkkayEjGyhC?=
Message-ID: <20110121225139.62404.qmail@web2904.mail.tnz.yahoo.co.jp>

亀山様
神奈川大学　鈴木陽介です。

以下のエラーがご指導いただいた手順では、 
RPM版でのSCore 7 beta5をSCore　7.0.1に 
に更新できませんでした。

ついては、以下の手順で更新を実行したいと思います。

■bininstallスクリプトの編集をして、インストールコマンド
実行時のエラー”競合エラー”によってインストールができな
い状況を回避する。


（１）SCore 7 beta5（CentOS
5.4(Final))をSCore　7.0.1（CentOS 5.5
） 
に更新する。


CentOS 5.4(Final)の環境を yum update -yコマンドで
CentOS 5.5(Final)の最新環境にバージョンアップする。


CentOS のバージョンの確認方法は
  cat /etc/issueで表示されます。

インストールイメージのダウンロード
　　http://www.pccluster.org/ja/download.html

　PC クラスタコンソーシアム＞ダウンロード＞SCoreディスト
リビューション
　＞SCore Cluster System Software Version 7からISOイメー
ジをダウンロードする。

　ISOイメージをダウンロードしたあと、DVDメディアに書き込
みインストールディスク
　として作成する。


DVDをserverホストにマウントして、イメージをデスクトップ
にすべてコピーする。
　　Score7/score/rpm.rhel5.x86_64/bininstallスクリプトを
編集する。

編集するところは１ヶ所です。

$show rpm --replacepkgs -Uvh $rpms 2>&1
を
$show rpm --replacepkgs --force -Uvh $rpms 2>&1
に修正する。

--force　をつける。 

参考にしたURLは以下のとおりです。 
　　　　http://www11.atwiki.jp/foxeye/pages/36.html

管理ホストｘ１、計算ホストｘ１６台に（bininstallスクリプ
トを編集した）
SCore　7.0.1のインストールイメージをSCPコマンドで各デス
クトップにコピーする。

手順（HowToInstall-From-RPM.txt)を実行する
   
http://www.pccluster.org/score_doc/score-7.0.1/HowToInstall-From-RPM.txt

手順どおりに実行します。

デスクトップにコピーしたインストールイメージからコマンド
を実行することです。つまり、以下のコマンドを実行するだけ
とおもっています

2.1 Server Host
    On the server host, do the following.

    server$ su -
    Password:
    server# cd <where the RPM files are located>
    server# sh ./bininstall -server

2.1 Compute Host
    On each compute host, do the following.

    compNN$ su -
    Password:
    compNN# cd <where the RPM files are located>
    compNN# sh ./bininstall -comp

手順（How to SETUP Score7）を実行する
　http://www.pccluster.org/score_doc/score-7.0.1/SetupSCore.txt


1. Setup ssh (or rsh)
2. Setup NFS
3. Create the Machine file
4. Reboot every compute hosts
5. Wait for booting up
6. Creating SCore database
7. Reboot 
8. MPI Hello


以　上



--------------------------------------
Get the new Internet Explorer 8 optimized for Yahoo! JAPAN
http://pr.mail.yahoo.co.jp/ie8/


From yosukeys ＠ yahoo.co.jp  Sat Jan 22 14:53:28 2011
From: yosukeys ＠ yahoo.co.jp (=?ISO-2022-JP?B?GyRCTmtMWhsoQiAbJEJNWzJwGyhC?=)
Date: Sat, 22 Jan 2011 14:53:28 +0900 (JST)
Subject: [SCore-users-jp] =?iso-2022-jp?b?GyRCMEoyPCROPEI5VCVtJTAkKyRpGyhC?=
 =?iso-2022-jp?b?GyRCISIlKCVpITwkTjJyPkNKfUshJCwkbyQrJGwkUDY1JCgkRiQvGyhC?=
 =?iso-2022-jp?b?GyRCJEAkNSQkISMbKEI=?=
Message-ID: <20110122055329.15561.qmail@web2901.mail.tnz.yahoo.co.jp>

亀山様
神奈川大学　鈴木陽介です。
ｃｃ：三田さん）

Score7の正規版+CentOS5.5(Final)の環境にbininstallスクリ
プトに--forceオプションをつけてバージョンアップした後、
以下のプログラムをコンパイル、実行しましたが

エラーになってしまいます。ラプラスのプログラムです。

-質問1-
Score7の正規版+CentOS5.5(Final)の環境に問題がないか切り
分けをする方法を教えてください。

-質問2-
以下の実行ログから、エラーの解消方法がわかれば教えて
ください。

-質問3-

PMX/EtherHXB device driverの設定手順は今回のエラー
解消には関係ありますか？


実行エラーのログ

# mpicc mpi-lap.c
# scrun -nodes=4x1 ./a.out
SCore (7.0.0) Connected
SCORE{1} 4 nodes (4x1) ready.
A.OUT ＠ host003#3516 <><><><><<><> (no trace available)
<><><><><<><>
A.OUT ＠ host003#3516: SIGSEGV (Access violation for mapped
object)
A.OUT ＠ host002#4395 <><><><><<><> (no trace available)
<><><><><<><>
A.OUT ＠ host002#4395: SIGSEGV (Access violation for mapped
object)
SCAN:a.out ＠ host003#3517: ------ Scanning a.out#3517 ------
SCAN:a.out ＠ host002#4396: ------ Scanning a.out#4396 ------
SCAN:a.out ＠ host003#3517: [Thread debugging using
libthread_db enabled]
SCAN:a.out ＠ host002#4396: [Thread debugging using
libthread_db enabled]
SCAN:a.out ＠ host002#4396: 0x0000003e5fc0e380 in
__pause_nocancel () from /lib64/libpthread.so.0
SCAN:a.out ＠ host002#4396: **** Inspecting address:
0x2b61239119a8 ****
SCAN:a.out ＠ host002#4396: 0x2b6123911978
<PMX_etherhxb_receive+312>:
SCAN:a.out ＠ host002#4396:     loopne 0x2b6123911989
<PMX_etherhxb_receive+329>
SCAN:a.out ＠ host002#4396: 0x2b612391197a
<PMX_etherhxb_receive+314>:     mov    $0x73,%bh
SCAN:a.out ＠ host002#4396: 0x2b612391197c
<PMX_etherhxb_receive+316>:     add    $0x41,%al
SCAN:a.out ＠ host002#4396: 0x2b612391197e
<PMX_etherhxb_receive+318>:     shr    $0x10,%ecx
SCAN:a.out ＠ host002#4396: 0x2b6123911981
<PMX_etherhxb_receive+321>:     shl    $0xe,%r8
SCAN:a.out ＠ host002#4396: 0x2b6123911985
<PMX_etherhxb_receive+325>:     mov    %r13d,0x358(%r14)
SCAN:a.out ＠ host002#4396: 0x2b612391198c
<PMX_etherhxb_receive+332>:     movzbl %r9b,%ecx
SCAN:a.out ＠ host002#4396: 0x2b6123911990
<PMX_etherhxb_receive+336>:     and    $0x1fffc000,%r8d
SCAN:a.out ＠ host002#4396: 0x2b6123911997
<PMX_etherhxb_receive+343>:     movzwl 0x2(%rbx),%r14d
SCAN:a.out ＠ host002#4396: 0x2b612391199c
<PMX_etherhxb_receive+348>:     add   
0x7d0(%rbp,%rcx,8),%r8
SCAN:a.out ＠ host002#4396: 0x2b61239119a4
<PMX_etherhxb_receive+356>:     lea    (%r8,%rsi,1),%rdx
SCAN:a.out ＠ host002#4396: 0x2b61239119a8
<PMX_etherhxb_receive+360>:     cmp    0x10(%rdx),%r14w
SCAN:a.out ＠ host002#4396: 0x2b61239119ad
<PMX_etherhxb_receive+365>:
SCAN:a.out ＠ host002#4396:     je     0x2b6123911da1
<PMX_etherhxb_receive+1377>
SCAN:a.out ＠ host002#4396: 0x2b61239119b3
<PMX_etherhxb_receive+371>:     mov    0x220(%rbp),%rcx
SCAN:a.out ＠ host002#4396: 0x2b61239119ba
<PMX_etherhxb_receive+378>:     addl   $0x1,0xd38(%rbp)
SCAN:a.out ＠ host002#4396: 0x2b61239119c1
<PMX_etherhxb_receive+385>:     movzwl 0x2(%rbx),%eax
SCAN:a.out ＠ host002#4396: 0x2b61239119c5
<PMX_etherhxb_receive+389>:     mov    (%rcx),%r10d
SCAN:a.out ＠ host002#4396: 0x2b61239119c8
<PMX_etherhxb_receive+392>:     mov    0x4(%rcx),%ebx
SCAN:a.out ＠ host002#4396: 0x2b61239119cb
<PMX_etherhxb_receive+395>:     cmp    %ebx,%r10d
SCAN:a.out ＠ host002#4396: 0x2b61239119ce
<PMX_etherhxb_receive+398>:
SCAN:a.out ＠ host002#4396:     jb     0x2b6123911b10
<PMX_etherhxb_receive+720>
SCAN:a.out ＠ host002#4396: 0x2b61239119d4
<PMX_etherhxb_receive+404>:     mov    (%rcx),%r14d
SCAN:a.out ＠ host002#4396: 0x2b61239119d7
<PMX_etherhxb_receive+407>:     mov    0x4(%rcx),%r11d
SCAN:a.out ＠ host002#4396: 0x2b61239119db
<PMX_etherhxb_receive+411>:     mov    %r11d,%edi
SCAN:a.out ＠ host002#4396: 0x2b61239119de
<PMX_etherhxb_receive+414>:     mov    %r14d,%edx
SCAN:a.out ＠ host002#4396: 0x2b61239119e1
<PMX_etherhxb_receive+417>:     add    $0x3ff,%rdi
SCAN:a.out ＠ host002#4396: 0x2b61239119e8
<PMX_etherhxb_receive+424>:     cmp    %rdi,%rdx
SCAN:a.out ＠ host003#3517: 0x0000003aa960e380 in
__pause_nocancel () from /lib64/libpthread.so.0
SCAN:a.out ＠ host003#3517: **** Inspecting address:
0x2b7b06ba49a8 ****
SCAN:a.out ＠ host003#3517: 0x2b7b06ba4978
<PMX_etherhxb_receive+312>:
SCAN:a.out ＠ host003#3517:     loopne 0x2b7b06ba4989
<PMX_etherhxb_receive+329>
SCAN:a.out ＠ host003#3517: 0x2b7b06ba497a
<PMX_etherhxb_receive+314>:     mov    $0x73,%bh
SCAN:a.out ＠ host003#3517: 0x2b7b06ba497c
<PMX_etherhxb_receive+316>:     add    $0x41,%al
SCAN:a.out ＠ host003#3517: 0x2b7b06ba497e
<PMX_etherhxb_receive+318>:     shr    $0x10,%ecx
SCAN:a.out ＠ host003#3517: 0x2b7b06ba4981
<PMX_etherhxb_receive+321>:     shl    $0xe,%r8
SCAN:a.out ＠ host003#3517: 0x2b7b06ba4985
<PMX_etherhxb_receive+325>:     mov    %r13d,0x358(%r14)
SCAN:a.out ＠ host003#3517: 0x2b7b06ba498c
<PMX_etherhxb_receive+332>:     movzbl %r9b,%ecx
SCAN:a.out ＠ host003#3517: 0x2b7b06ba4990
<PMX_etherhxb_receive+336>:     and    $0x1fffc000,%r8d
SCAN:a.out ＠ host003#3517: 0x2b7b06ba4997
<PMX_etherhxb_receive+343>:     movzwl 0x2(%rbx),%r14d
SCAN:a.out ＠ host003#3517: 0x2b7b06ba499c
<PMX_etherhxb_receive+348>:     add   
0x7d0(%rbp,%rcx,8),%r8
SCAN:a.out ＠ host003#3517: 0x2b7b06ba49a4
<PMX_etherhxb_receive+356>:     lea    (%r8,%rsi,1),%rdx
SCAN:a.out ＠ host003#3517: 0x2b7b06ba49a8
<PMX_etherhxb_receive+360>:     cmp    0x10(%rdx),%r14w
SCAN:a.out ＠ host003#3517: 0x2b7b06ba49ad
<PMX_etherhxb_receive+365>:
SCAN:a.out ＠ host003#3517:     je     0x2b7b06ba4da1
<PMX_etherhxb_receive+1377>
SCAN:a.out ＠ host003#3517: 0x2b7b06ba49b3
<PMX_etherhxb_receive+371>:     mov    0x220(%rbp),%rcx
SCAN:a.out ＠ host003#3517: 0x2b7b06ba49ba
<PMX_etherhxb_receive+378>:     addl   $0x1,0xd38(%rbp)
SCAN:a.out ＠ host003#3517: 0x2b7b06ba49c1
<PMX_etherhxb_receive+385>:     movzwl 0x2(%rbx),%eax
SCAN:a.out ＠ host003#3517: 0x2b7b06ba49c5
<PMX_etherhxb_receive+389>:     mov    (%rcx),%r10d
SCAN:a.out ＠ host003#3517: 0x2b7b06ba49c8
<PMX_etherhxb_receive+392>:     mov    0x4(%rcx),%ebx
SCAN:a.out ＠ host003#3517: 0x2b7b06ba49cb
<PMX_etherhxb_receive+395>:     cmp    %ebx,%r10d
SCAN:a.out ＠ host003#3517: 0x2b7b06ba49ce
<PMX_etherhxb_receive+398>:
SCAN:a.out ＠ host003#3517:     jb     0x2b7b06ba4b10
<PMX_etherhxb_receive+720>
SCAN:a.out ＠ host003#3517: 0x2b7b06ba49d4
<PMX_etherhxb_receive+404>:     mov    (%rcx),%r14d
SCAN:a.out ＠ host003#3517: 0x2b7b06ba49d7
<PMX_etherhxb_receive+407>:     mov    0x4(%rcx),%r11d
SCAN:a.out ＠ host003#3517: 0x2b7b06ba49db
<PMX_etherhxb_receive+411>:     mov    %r11d,%edi
SCAN:a.out ＠ host003#3517: 0x2b7b06ba49de
<PMX_etherhxb_receive+414>:     mov    %r14d,%edx
SCAN:a.out ＠ host003#3517: 0x2b7b06ba49e1
<PMX_etherhxb_receive+417>:     add    $0x3ff,%rdi
SCAN:a.out ＠ host003#3517: 0x2b7b06ba49e8
<PMX_etherhxb_receive+424>:     cmp    %rdi,%rdx
SCAN:a.out ＠ host003#3517: **** Stack Back Trace ****
SCAN:a.out ＠ host003#3517:
SCAN:a.out ＠ host003#3517: Thread 1 (Thread 0x2b7b066b8670
(LWP 3517)):
SCAN:a.out ＠ host003#3517: #0  0x0000003aa960e380 in
__pause_nocancel () from /lib64/libpthread.so.0
SCAN:a.out ＠ host003#3517: No symbol table info available.
SCAN:a.out ＠ host003#3517: #1  0x00002b7b062a8ad5 in
__sc__attach_debugger (signal=11,
SCAN:a.out ＠ host003#3517:     ctxp=<value optimized out>)
at ../attach.c:137
SCAN:a.out ＠ host003#3517:         pc = 47807393843624
SCAN:a.out ＠ host003#3517:         pid_debuggee = -514
SCAN:a.out ＠ host003#3517:         pid_debugger = <value
optimized out>
SCAN:a.out ＠ host003#3517: #2  0x00002b7b062a8a7e in
score_exception_handler (signal=11, info=0x1b819d70,
SCAN:a.out ＠ host003#3517:     ctx=0x1b819c40) at
../attach.c:210
SCAN:a.out ＠ host003#3517:         errout = 0x3aa8d51860
SCAN:a.out ＠ host003#3517: #3  <signal handler called>
SCAN:a.out ＠ host003#3517: No symbol table info available.
SCAN:a.out ＠ host003#3517: #4  0x00002b7b06ba49a8 in
PMX_etherhxb_receive ()
SCAN:a.out ＠ host003#3517:    from
/opt/score/7.0.0//lib/obj.x86_64-rhel5-linux2_6/etherhxb.so
SCAN:a.out ＠ host003#3517: No symbol table info available.
SCAN:a.out ＠ host003#3517: #5  0x00002b7b057a6819 in
comp_receive (pmc=0x2b7b066b9000,
SCAN:a.out ＠ host003#3517:     bufp=0x7fffb5a31940,
sizep=0x7fffb5a31938, descp=0x7fffb5a31928)
SCAN:a.out ＠ host003#3517:     at ../composite.c:2560
SCAN:a.oSCAN:a.out ＠ host002#4396: **** Stack Back Trace
****
SCAN:a.out ＠ host002#4396:
SCAN:a.out ＠ host002#4396: Thread 1 (Thread 0x2b6123425670
(LWP 4396)):
SCAN:a.out ＠ host002#4396: #0  0x0000003e5fc0e380 in
__pause_nocancel () from /lib64/libpthread.so.0
SCAN:a.out ＠ host002#4396: No symbol table info available.
SCAN:a.out ＠ host002#4396: #1  0x00002b6123015ad5 in
__sc__attach_debugger (signal=11,
SCAN:a.out ＠ host002#4396:     ctxp=<value optimized out>)
at ../attach.c:137
SCAN:a.out ＠ host002#4396:         pc = 47696208533928
SCAN:a.out ＠ host002#4396:         pid_debuggee = -514
SCAN:a.out ＠ host002#4396:         pid_debugger = <value
optimized out>
SCAN:a.out ＠ host002#4396: #2  0x00002b6123015a7e in
score_exception_handler (signal=11, info=0x1bcc8d70,
SCAN:a.out ＠ host002#4396:     ctx=0x1bcc8c40) at
../attach.c:210
SCAN:a.out ＠ host002#4396:         errout = 0x3e5f351860
SCAN:a.out ＠ host002#4396: #3  <signal handler called>
SCAN:a.out ＠ host002#4396: No symbol table info available.
SCAN:a.out ＠ host002#4396: #4  0x00002b61239119a8 in
PMX_etherhxb_receive ()
SCAN:a.out ＠ host002#4396:    from
/opt/score/7.0.0//lib/obj.x86_64-rhel5-linux2_6/etherhxb.so
SCAN:a.out ＠ host002#4396: No symbol table info available.
SCAN:a.out ＠ host002#4396: #5  0x00002b6122513819 in
comp_receive (pmc=0x2b6123426000,
SCAN:a.out ＠ host002#4396:     bufp=0x7fff129fead0,
sizep=0x7fff129feac8, descp=0x7fff129feab8)
SCAN:a.out ＠ host002#4396:     at ../composite.c:2560
SCAN:a.out ＠ host002#4396: No locals.
SCAN:a.out ＠ host002#4396: #6  pmxReceive
(pmc=0x2b6123426000, bufp=0x7fff129fead0,
sizep=0x7fff129feac8,
SCAN:a.out ＠ host002#4396:     descp=0x7fff129feab8) at
../composite.c:2650
SCAN:a.out ＠ host002#4396:         err = 71
SCAN:a.out ＠ host002#4396: #7  0x00002b61220d08ec in
MTMIT_BT_SCore_Recv ()
SCAN:a.out ＠ host002#4396:    from
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host002#4396: No symbol table info available.
SCAN:a.out ＠ host002#4396: #8  0x00002b61220cac36 in
MTMIT_BT_Progress ()
SCAN:a.out ＠ host002#4396:    from
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host002#4396: No symbol table info available.
SCAN:a.out ＠ host002#4396: #9  0x00002b61220c9c55 in
MTMI_WaitEvent ()
SCAN:a.out ＠ host002#4396:    from
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host002#4396: No symbol table info available.
SCAN:a.out ＠ host002#4396: #10 0x00002b6121e0e657 in
MPID_MTMI_progress ()
SCAN:a.out ＠ host002#4396:    from
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host002#4396: No symbol table info available.
SCAN:a.out ＠ host002#4396: #11 0x00002b6121e0e7cc in
MPID_Progress_wait ()
SCAN:a.out ＠ host002#4396:    from
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host002#4396: No symbol table info available.
SCAN:a.out ＠ host002#4396: #12 0x00002b6121e50e13 in
PMPI_Wait ()
SCAN:a.out ＠ host002#4396:    from
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host002#4396: No symbol table info available.
SCAN:a.out ＠ host002#4396: #13 0x0000000000400f3e in main ()
SCAN:a.out ＠ host002#4396: No symbol table info available.
ut ＠ host003#3517: No locals.
SCAN:a.out ＠ host003#3517: #6  pmxReceive
(pmc=0x2b7b066b9000, bufp=0x7fffb5a31940,
sizep=0x7fffb5a31938,
SCAN:a.out ＠ host003#3517:     descp=0x7fffb5a31928) at
../composite.c:2650
SCAN:a.out ＠ host003#3517:         err = 71
SCAN:a.out ＠ host003#3517: #7  0x00002b7b053638ec in
MTMIT_BT_SCore_Recv ()
SCAN:a.out ＠ host003#3517:    from
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host003#3517: No symbol table info available.
SCAN:a.out ＠ host003#3517: #8  0x00002b7b0535dc36 in
MTMIT_BT_Progress ()
SCAN:a.out ＠ host003#3517:    from
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host003#3517: No symbol table info available.
SCAN:a.out ＠ host003#3517: #9  0x00002b7b0535cc55 in
MTMI_WaitEvent ()
SCAN:a.out ＠ host003#3517:    from
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host003#3517: No symbol table info available.
SCAN:a.out ＠ host003#3517: #10 0x00002b7b050a1657 in
MPID_MTMI_progress ()
SCAN:a.out ＠ host003#3517:    from
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host003#3517: No symbol table info available.
SCAN:a.out ＠ host003#3517: #11 0x00002b7b050a17cc in
MPID_Progress_wait ()
SCAN:a.out ＠ host003#3517:    from
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host003#3517: No symbol table info available.
SCAN:a.out ＠ host003#3517: #12 0x00002b7b050e3e13 in
PMPI_Wait ()
SCAN:a.out ＠ host003#3517:    from
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host003#3517: No symbol table info available.
SCAN:a.out ＠ host003#3517: #13 0x0000000000400f3e in main ()
SCAN:a.out ＠ host003#3517: No symbol table info available.

<2> SCORE: Program signaled (Segmentation fault).


以　上

--------------------------------------
Get the new Internet Explorer 8 optimized for Yahoo! JAPAN
http://pr.mail.yahoo.co.jp/ie8/


From yosukeys ＠ yahoo.co.jp  Sun Jan 23 15:57:45 2011
From: yosukeys ＠ yahoo.co.jp (=?ISO-2022-JP?B?GyRCTmtMWhsoQiAbJEJNWzJwGyhC?=)
Date: Sun, 23 Jan 2011 15:57:45 +0900 (JST)
Subject: [SCore-users-jp] =?iso-2022-jp?b?U2NvcmU3LkJhdGE1IBskQiQrJGkbKEI=?=
 =?iso-2022-jp?b?GyRCJE5ANTUsSEckWCROJSIlQyVXJTAlbCE8JUlKfUshJEskRCQkGyhC?=
 =?iso-2022-jp?b?GyRCJEYbKEI=?=
Message-ID: <20110123065745.32151.qmail@web2907.mail.tnz.yahoo.co.jp>

亀山樣
神奈川大学 鈴木陽介です。

Score7.Bata5からの正規版へのアップグレード方法について
自己解決ができました。競合エラーは回避できできました。
ご指導有難うございました。残る問題は別途まとめてご連絡い
たします。

＞Score7.Bata5からの正規版への移行方法

yum list linstalled | grep score7*

yum remove score7*

マシンをリブート

インストールDVDをマウントして、通常のインストール手順で
バージョンアップできます。前堤のシステム設定に影響はでま
せん。 

http://www.pccluster.org/score_doc/score-7.0.1/HowToInstall-From-DVD.txt

そのあと、通常の設定手順でセットアップできます。
前堤のシステム設定に影響はでません。
http://www.pccluster.org/score_doc/score-7.0.1/SetupSCore.txt

以 上


--------------------------------------
Get the new Internet Explorer 8 optimized for Yahoo! JAPAN
http://pr.mail.yahoo.co.jp/ie8/


From yosukeys ＠ yahoo.co.jp  Sun Jan 23 16:34:16 2011
From: yosukeys ＠ yahoo.co.jp (=?ISO-2022-JP?B?GyRCTmtMWhsoQiAbJEJNWzJwGyhC?=)
Date: Sun, 23 Jan 2011 16:34:16 +0900 (JST)
Subject: [SCore-users-jp] =?iso-2022-jp?b?UE1YL0V0aGVySFhCIGRldmljZSBkcml2?=
 =?iso-2022-jp?b?ZXIgGyRCJE5AX0RqSn1LISRyNjUkKCRGJC8kQCQ1JCQhIxsoQg==?=
Message-ID: <20110123073416.25732.qmail@web2914.mail.tnz.yahoo.co.jp>

亀山樣
神奈川大学 鈴木陽介です。

PMX/EtherHXB device driverの設定方法を教えてください。

標準インストールでは、設定は必要ないとおもいますが

ラプラスのサンプルプログラム"Liunxで並列処理をしよう弟2
版"の
(P44ー45)をコンパイルして、実行したところ、ノードの通信
エラー?
でないかとおもわれるエラーが表示されました。

素人ですが、ネットワーク関連の問題のような気がします。
score7は標準でRPMで設定しましたのでソースコードから
のconfigureではないほうがよいのですが.......

(1)ethernetのエラー
 
[root ＠ server3 ~]# pmxtest -network ethernet
PMXTEST.EXE ＠ host002#5152 <><><><><<><> (no trace
available) <><><><><<><>
PMXTEST.EXE ＠ host002[0/1:0/1]#5152: ABORT open_context() at
pmx.c:65  Invalid argument
SCOUT(host002): Process 5152 terminated with an exception
signal (9:Killed).
 
(2)コンパイルエラー
[root ＠ server3 sc01]# scrun -nodes=16x1 -group=pcc ./a.out
SCore (7.0.0) Connected
SCORE{1} 16 nodes (16x1) ready.
A.OUT ＠ host016#4392 <><><><><<><> (no trace available)
<><><><><<><>
A.OUT ＠ host002#3634 <><><><><<><> (no trace available)
<><><><><<><>
A.OUT ＠ host003#5710 <><><><><<><> (no trace available)
<><><><><<><>
SCAN:a.out ＠ host016#4393: ------ Scanning a.out#4393 ------
SCAN:a.out ＠ host003#5711: ------ Scanning a.out#5711 ------
SCAN:a.out ＠ host016#4393: [Thread debugging using
libthread_db enabled]
SCAN:a.out ＠ host002#3635: ------ Scanning a.out#3635 ------
SCAN:a.out ＠ host003#5711: [Thread debugging using
libthread_db enabled]
SCAN:a.out ＠ host016#4393: 0x0000003b8600e380 in
__pause_nocancel () from 
/lib64/libpthread.so.0
SCAN:a.out ＠ host016#4393: **** Inspecting address:
0x2ba5bc6349a8 ****
SCAN:a.out ＠ host016#4393: 0x2ba5bc634978
<PMX_etherhxb_receive+312>:
SCAN:a.out ＠ host016#4393:     loopne 0x2ba5bc634989 
<PMX_etherhxb_receive+329>
SCAN:a.out ＠ host016#4393: 0x2ba5bc63497a
<PMX_etherhxb_receive+314>:     mov    
$0x73,%bh
SCAN:a.out ＠ host016#4393: 0x2ba5bc63497c
<PMX_etherhxb_receive+316>:     add    
$0x41,%al
SCAN:a.out ＠ host016#4393: 0x2ba5bc63497e
<PMX_etherhxb_receive+318>:     shr    
$0x10,%ecx
SCAN:a.out ＠ host016#4393: 0x2ba5bc634981
<PMX_etherhxb_receive+321>:     shl    
$0xe,%r8
SCAN:a.out ＠ host016#4393: 0x2ba5bc634985
<PMX_etherhxb_receive+325>:     mov    
%r13d,0x358(%r14)
SCAN:a.out ＠ host016#4393: 0x2ba5bc63498c
<PMX_etherhxb_receive+332>:     
movzbl %r9b,%ecx
SCAN:a.out ＠ host016#4393: 0x2ba5bc634990
<PMX_etherhxb_receive+336>:     and    
$0x1fffc000,%r8d
SCAN:a.out ＠ host016#4393: 0x2ba5bc634997
<PMX_etherhxb_receive+343>:     
movzwl 0x2(%rbx),%r14d
SCAN:a.out ＠ host016#4393: 0x2ba5bc63499c
<PMX_etherhxb_receive+348>:     add    
0x7d0(%rbp,%rcx,8),%r8
SCAN:a.out ＠ host016#4393: 0x2ba5bc6349a4
<PMX_etherhxb_receive+356>:     lea    
(%r8,%rsi,1),%rdx
SCAN:a.out ＠ host016#4393: 0x2ba5bc6349a8
<PMX_etherhxb_receive+360>:     cmp    
0x10(%rdx),%r14w
SCAN:a.out ＠ host016#4393: 0x2ba5bc6349ad
<PMX_etherhxb_receive+365>:
SCAN:a.out ＠ host016#4393:     je     0x2ba5bc634da1 
<PMX_etherhxb_receive+1377>
SCAN:a.out ＠ host016#4393: 0x2ba5bc6349b3
<PMX_etherhxb_receive+371>:     mov    
0x220(%rbp),%rcx
SCAN:a.out ＠ host016#4393: 0x2ba5bc6349ba
<PMX_etherhxb_receive+378>:     
addl   $0x1,0xd38(%rbp)
SCAN:a.out ＠ host016#4393: 0x2ba5bc6349c1
<PMX_etherhxb_receive+385>:     
movzwl 0x2(%rbx),%eax
SCAN:a.out ＠ host016#4393: 0x2ba5bc6349c5
<PMX_etherhxb_receive+389>:     mov    
(%rcx),%r10d
SCAN:a.out ＠ host016#4393: 0x2ba5bc6349c8
<PMX_etherhxb_receive+392>:     mov    
0x4(%rcx),%ebx
SCAN:a.out ＠ host016#4393: 0x2ba5bc6349cb
<PMX_etherhxb_receive+395>:     cmp    
%ebx,%r10d
SCAN:a.out ＠ host016#4393: 0x2ba5bc6349ce
<PMX_etherhxb_receive+398>:
SCAN:a.out ＠ host016#4393:     jb     0x2ba5bc634b10 
<PMX_etherhxb_receive+720>
SCAN:a.out ＠ host016#4393: 0x2ba5bc6349d4
<PMX_etherhxb_receive+404>:     mov    
(%rcx),%r14d
SCAN:a.out ＠ host016#4393: 0x2ba5bc6349d7
<PMX_etherhxb_receive+407>:     mov    
0x4(%rcx),%r11d
SCAN:a.out ＠ host016#4393: 0x2ba5bc6349db
<PMX_etherhxb_receive+411>:     mov    
%r11d,%edi
SCAN:a.out ＠ host016#4393: 0x2ba5bc6349de
<PMX_etherhxb_receive+414>:     mov    
%r14d,%edx
SCAN:a.out ＠ host016#4393: 0x2ba5bc6349e1
<PMX_etherhxb_receive+417>:     add    
$0x3ff,%rdi
SCAN:a.out ＠ host016#4393: 0x2ba5bc6349e8
<PMX_etherhxb_receive+424>:     cmp    
%rdi,%rdx
SCAN:a.out ＠ host016#4393: **** Stack Back Trace ****
SCAN:a.out ＠ host016#4393:
SCAN:a.out ＠ host016#4393: Thread 1 (Thread 0x2ba5bc148670
(LWP 4393)):
SCAN:a.out ＠ host016#4393: #0  0x0000003b8600e380 in
__pause_nocancel () from 
/lib64/libpthread.so.0
SCAN:a.out ＠ host016#4393: No symbol table info available.
SCAN:a.out ＠ host016#4393: #1  0x00002ba5bbd38ad5 in
__sc__attach_debugger 
(signal=11,
SCAN:a.out ＠ host016#4393:     ctxp=<value optimized out>)
at ../attach.c:137
SCAN:a.out ＠ host016#4393:         pc = 47990830221736
SCAN:a.out ＠ host016#4393:         pid_debuggee = -514
SCAN:a.out ＠ host016#4393:         pid_debugger = <value
optimized out>
SCAN:a.out ＠ host016#4393: #2  0x00002ba5bbd38a7e in
score_exception_handler 
(signal=11, info=0x1cbbad70,
SCAN:a.out ＠ host016#4393:     ctx=0x1cbbac40) at
../attach.c:210
SCAN:a.out ＠ host016#4393:         errout = 0x3b85751860
SCAN:a.out ＠ host016#4393: #3  <signal handler called>
SCAN:a.out ＠ host016#4393: No symbol table info available.
SCAN:a.out ＠ host016#4393: #4  0x00002ba5bc6349a8 in
PMX_etherhxb_receive ()
SCAN:a.out ＠ host016#4393:    from 
/opt/score/7.0.0//lib/obj.x86_64-rhel5-linux2_6/etherhxb.so
SCAN:a.out ＠ host016#4393: No symbol table info available.
SCAN:a.out ＠ host016#4393: #5  0x00002ba5bb236819 in
comp_receive 
(pmc=0x2ba5bc149000,
SCAN:a.out ＠ host016#4393:     bufp=0x7fff64673640,
sizep=0x7fff64673638, 
descp=0x7fff64673628)
SCAN:a.out ＠ host016#4393:     at ../composite.c:2560
SCAN:a.oSCAN:a.out ＠ host003#5711: 0x0000003aa960e380 in
__pause_nocancel () 
from /lib64/libpthread.so.0
SCAN:a.out ＠ host003#5711: **** Inspecting address:
0x2b06651159a8 ****
SCAN:a.out ＠ host003#5711: 0x2b0665115978
<PMX_etherhxb_receive+312>:
SCAN:a.out ＠ host003#5711:     loopne 0x2b0665115989 
<PMX_etherhxb_receive+329>
SCAN:a.out ＠ host003#5711: 0x2b066511597a
<PMX_etherhxb_receive+314>:     mov    
$0x73,%bh
SCAN:a.out ＠ host003#5711: 0x2b066511597c
<PMX_etherhxb_receive+316>:     add    
$0x41,%al
SCAN:a.out ＠ host003#5711: 0x2b066511597e
<PMX_etherhxb_receive+318>:     shr    
$0x10,%ecx
SCAN:a.out ＠ host003#5711: 0x2b0665115981
<PMX_etherhxb_receive+321>:     shl    
$0xe,%r8
SCAN:a.out ＠ host003#5711: 0x2b0665115985
<PMX_etherhxb_receive+325>:     mov    
%r13d,0x358(%r14)
SCAN:a.out ＠ host003#5711: 0x2b066511598c
<PMX_etherhxb_receive+332>:     
movzbl %r9b,%ecx
SCAN:a.out ＠ host003#5711: 0x2b0665115990
<PMX_etherhxb_receive+336>:     and    
$0x1fffc000,%r8d
SCAN:a.out ＠ host003#5711: 0x2b0665115997
<PMX_etherhxb_receive+343>:     
movzwl 0x2(%rbx),%r14d
SCAN:a.out ＠ host003#5711: 0x2b066511599c
<PMX_etherhxb_receive+348>:     add    
0x7d0(%rbp,%rcx,8),%r8
SCAN:a.out ＠ host003#5711: 0x2b06651159a4
<PMX_etherhxb_receive+356>:     lea    
(%r8,%rsi,1),%rdx
SCAN:a.out ＠ host003#5711: 0x2b06651159a8
<PMX_etherhxb_receive+360>:     cmp    
0x10(%rdx),%r14w
SCAN:a.out ＠ host003#5711: 0x2b06651159ad
<PMX_etherhxb_receive+365>:
SCAN:a.out ＠ host003#5711:     je     0x2b0665115da1 
<PMX_etherhxb_receive+1377>
SCAN:a.out ＠ host003#5711: 0x2b06651159b3
<PMX_etherhxb_receive+371>:     mov    
0x220(%rbp),%rcx
SCAN:a.out ＠ host003#5711: 0x2b06651159ba
<PMX_etherhxb_receive+378>:     
addl   $0x1,0xd38(%rbp)
SCAN:a.out ＠ host003#5711: 0x2b06651159c1
<PMX_etherhxb_receive+385>:     
movzwl 0x2(%rbx),%eax
SCAN:a.out ＠ host003#5711: 0x2b06651159c5
<PMX_etherhxb_receive+389>:     mov    
(%rcx),%r10d
SCAN:a.out ＠ host003#5711: 0x2b06651159c8
<PMX_etherhxb_receive+392>:     mov    
0x4(%rcx),%ebx
SCAN:a.out ＠ host003#5711: 0x2b06651159cb
<PMX_etherhxb_receive+395>:     cmp    
%ebx,%r10d
SCAN:a.out ＠ host003#5711: 0x2b06651159ce
<PMX_etherhxb_receive+398>:
SCAN:a.out ＠ host003#5711:     jb     0x2b0665115b10 
<PMX_etherhxb_receive+720>
SCAN:a.out ＠ host003#5711: 0x2b06651159d4
<PMX_etherhxb_receive+404>:     mov    
(%rcx),%r14d
SCAN:a.out ＠ host003#5711: 0x2b06651159d7
<PMX_etherhxb_receive+407>:     mov    
0x4(%rcx),%r11d
SCAN:a.out ＠ host003#5711: 0x2b06651159db
<PMX_etherhxb_receive+411>:     mov    
%r11d,%edi
SCAN:a.out ＠ host003#5711: 0x2b06651159de
<PMX_etherhxb_receive+414>:     mov    
%r14d,%edx
SCAN:a.out ＠ host003#5711: 0x2b06651159e1
<PMX_etherhxb_receive+417>:     add    
$0x3ff,%rdi
SCAN:a.out ＠ host003#5711: 0x2b06651159e8
<PMX_etherhxb_receive+424>:     cmp    
%rdi,%rdx
SCAN:a.out ＠ host003#5711: **** Stack Back Trace ****
SCAN:a.out ＠ host003#5711:
SCAN:a.out ＠ host003#5711: Thread 1 (Thread 0x2b0664c29670
(LWP 5711)):
SCAN:a.out ＠ host003#5711: #0  0x0000003aa960e380 in
__pause_nocancel () from 
/lib64/libpthread.so.0
SCAN:a.out ＠ host003#5711: No symbol table info available.
SCAN:a.out ＠ host003#5711: #1  0x00002b0664819ad5 in
__sc__attach_debugger 
(signal=11,
SCAN:a.out ＠ host003#5711:     ctxp=<value optimized out>)
at ../attach.c:137
SCAN:a.out ＠ host003#5711:         pc = 47306465434024
SCAN:a.out ＠ host003#5711:         pid_debuggee = -514
SCAN:a.out ＠ host003#5711:         pid_debugger = <value
optimized out>
SCAN:a.out ＠ host003#5711: #2  0x00002b0664819a7e in
score_exception_handler 
(signal=11, info=0x192f2d70,
SCAN:a.out ＠ host003#5711:     ctx=0x192f2c40) at
../attach.c:210
SCAN:a.out ＠ host003#5711:         errout = 0x3aa8d51860
SCAN:a.out ＠ host003#5711: #3  <signal handler called>
SCAN:a.out ＠ host003#5711: No symbol table info available.
SCAN:a.out ＠ host003#5711: #4  0x00002b06651159a8 in
PMX_etherhxb_receive ()
SCAN:a.out ＠ host003#5711:    from 
/opt/score/7.0.0//lib/obj.x86_64-rhel5-linux2_6/etherhxb.so
SCAN:a.out ＠ host003#5711: No symbol table info available.
SCAN:a.out ＠ host003#5711: #5  0x00002b0663d17819 in
comp_receive 
(pmc=0x2b0664c2a000,
SCAN:a.out ＠ host003#5711:     bufp=0x7fff3344cea0,
sizep=0x7fff3344ce98, 
descp=0x7fff3344ce88)
SCAN:a.out ＠ host003#5711:     at ../composite.c:2560
SCAN:a.out ＠ host016#4393: No locals.
SCAN:a.out ＠ host016#4393: #6  pmxReceive
(pmc=0x2ba5bc149000, 
bufp=0x7fff64673640, sizep=0x7fff64673638,
SCAN:a.out ＠ host016#4393:     descp=0x7fff64673628) at
../composite.c:2650
SCAN:a.out ＠ host016#4393:         err = 71
SCAN:a.out ＠ host016#4393: #7  0x00002ba5badf38ec in
MTMIT_BT_SCore_Recv ()
SCAN:a.out ＠ host016#4393:    from 
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host016#4393: No symbol table info available.
SCAN:a.out ＠ host016#4393: #8  0x00002ba5badedc36 in
MTMIT_BT_Progress ()
SCAN:a.out ＠ host016#4393:    from 
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host016#4393: No symbol table info available.
SCAN:a.out ＠ host016#4393: #9  0x00002ba5badec4cb in
MTMI_TestAny ()
SCAN:a.out ＠ host016#4393:    from 
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host016#4393: No symbol table info available.
SCAN:a.out ＠ host016#4393: #10 0x00002ba5bab31668 in
MPID_MTMI_progress ()
SCAN:a.out ＠ host016#4393:    from 
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host016#4393: No symbol table info available.
SCAN:a.out ＠ host016#4393: #11 0x00002ba5bab317cc in
MPID_Progress_wait ()
SCAN:a.out ＠ host016#4393:    from 
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host016#4393: No symbol table info available.
SCAN:a.out ＠ host016#4393: #12 0x00002ba5bab73e13 in
PMPI_Wait ()
SCAN:a.out ＠ host016#4393:    from 
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host016#4393: No symbol table info available.
SCAN:a.out ＠ host016#4393: #13 0x0000000000400f3e in main ()
SCAN:a.out ＠ host016#4393: No symbol table info available.
ut ＠ host003#5711: No locals.
SCAN:a.out ＠ host003#5711: #6  pmxReceive
(pmc=0x2b0664c2a000, 
bufp=0x7fff3344cea0, sizep=0x7fff3344ce98,
SCAN:a.out ＠ host003#5711:     descp=0x7fff3344ce88) at
../composite.c:2650
SCAN:a.out ＠ host003#5711:         err = 71
SCAN:a.out ＠ host003#5711: #7  0x00002b06638d48ec in
MTMIT_BT_SCore_Recv ()
SCAN:a.out ＠ host003#5711:    from 
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host003#5711: No symbol table info available.
SCAN:a.out ＠ host003#5711: #8  0x00002b06638cec36 in
MTMIT_BT_Progress ()
SCAN:a.out ＠ host003#5711:    from 
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host003#5711: No symbol table info available.
SCAN:a.out ＠ host003#5711: #9  0x00002b06638cdc55 in
MTMI_WaitEvent ()
SCAN:a.out ＠ host003#5711:    from 
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host003#5711: No symbol table info available.
SCAN:a.out ＠ host003#5711: #10 0x00002b0663612657 in
MPID_MTMI_progress ()
SCAN:a.out ＠ host003#5711:    from 
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host003#5711: No symbol table info available.
SCAN:a.out ＠ host003#5711: #11 0x00002b06636127cc in
MPID_Progress_wait ()
SCAN:a.out ＠ host003#5711:    from 
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host003#5711: No symbol table info available.
SCAN:a.out ＠ host003#5711: #12 0x00002b0663654e13 in
PMPI_Wait ()
SCAN:a.out ＠ host003#5711:    from 
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host003#5711: No symbol table info available.
SCAN:a.out ＠ host003#5711: #13 0x0000000000400f3e in main ()
SCAN:a.out ＠ host003#5711: No symbol table info available.
SCAN:a.out ＠ host002#3635: [Thread debugging using
libthread_db enabled]
SCAN:a.out ＠ host002#3635: 0x0000003e5fc0e380 in
__pause_nocancel () from 
/lib64/libpthread.so.0
SCAN:a.out ＠ host002#3635: **** Inspecting address:
0x2b1e2e0229a8 ****
SCAN:a.out ＠ host002#3635: 0x2b1e2e022978
<PMX_etherhxb_receive+312>:
SCAN:a.out ＠ host002#3635:     loopne 0x2b1e2e022989 
<PMX_etherhxb_receive+329>
SCAN:a.out ＠ host002#3635: 0x2b1e2e02297a
<PMX_etherhxb_receive+314>:     mov    
$0x73,%bh
SCAN:a.out ＠ host002#3635: 0x2b1e2e02297c
<PMX_etherhxb_receive+316>:     add    
$0x41,%al
SCAN:a.out ＠ host002#3635: 0x2b1e2e02297e
<PMX_etherhxb_receive+318>:     shr    
$0x10,%ecx
SCAN:a.out ＠ host002#3635: 0x2b1e2e022981
<PMX_etherhxb_receive+321>:     shl    
$0xe,%r8
SCAN:a.out ＠ host002#3635: 0x2b1e2e022985
<PMX_etherhxb_receive+325>:     mov    
%r13d,0x358(%r14)
SCAN:a.out ＠ host002#3635: 0x2b1e2e02298c
<PMX_etherhxb_receive+332>:     
movzbl %r9b,%ecx
SCAN:a.out ＠ host002#3635: 0x2b1e2e022990
<PMX_etherhxb_receive+336>:     and    
$0x1fffc000,%r8d
SCAN:a.out ＠ host002#3635: 0x2b1e2e022997
<PMX_etherhxb_receive+343>:     
movzwl 0x2(%rbx),%r14d
SCAN:a.out ＠ host002#3635: 0x2b1e2e02299c
<PMX_etherhxb_receive+348>:     add    
0x7d0(%rbp,%rcx,8),%r8
SCAN:a.out ＠ host002#3635: 0x2b1e2e0229a4
<PMX_etherhxb_receive+356>:     lea    
(%r8,%rsi,1),%rdx
SCAN:a.out ＠ host002#3635: 0x2b1e2e0229a8
<PMX_etherhxb_receive+360>:     cmp    
0x10(%rdx),%r14w
SCAN:a.out ＠ host002#3635: 0x2b1e2e0229ad
<PMX_etherhxb_receive+365>:
SCAN:a.out ＠ host002#3635:     je     0x2b1e2e022da1 
<PMX_etherhxb_receive+1377>
SCAN:a.out ＠ host002#3635: 0x2b1e2e0229b3
<PMX_etherhxb_receive+371>:     mov    
0x220(%rbp),%rcx
SCAN:a.out ＠ host002#3635: 0x2b1e2e0229ba
<PMX_etherhxb_receive+378>:     
addl   $0x1,0xd38(%rbp)
SCAN:a.out ＠ host002#3635: 0x2b1e2e0229c1
<PMX_etherhxb_receive+385>:     
movzwl 0x2(%rbx),%eax
SCAN:a.out ＠ host002#3635: 0x2b1e2e0229c5
<PMX_etherhxb_receive+389>:     mov    
(%rcx),%r10d
SCAN:a.out ＠ host002#3635: 0x2b1e2e0229c8
<PMX_etherhxb_receive+392>:     mov    
0x4(%rcx),%ebx
SCAN:a.out ＠ host002#3635: 0x2b1e2e0229cb
<PMX_etherhxb_receive+395>:     cmp    
%ebx,%r10d
SCAN:a.out ＠ host002#3635: 0x2b1e2e0229ce
<PMX_etherhxb_receive+398>:
SCAN:a.out ＠ host002#3635:     jb     0x2b1e2e022b10 
<PMX_etherhxb_receive+720>
SCAN:a.out ＠ host002#3635: 0x2b1e2e0229d4
<PMX_etherhxb_receive+404>:     mov    
(%rcx),%r14d
SCAN:a.out ＠ host002#3635: 0x2b1e2e0229d7
<PMX_etherhxb_receive+407>:     mov    
0x4(%rcx),%r11d
SCAN:a.out ＠ host002#3635: 0x2b1e2e0229db
<PMX_etherhxb_receive+411>:     mov    
%r11d,%edi
SCAN:a.out ＠ host002#3635: 0x2b1e2e0229de
<PMX_etherhxb_receive+414>:     mov    
%r14d,%edx
SCAN:a.out ＠ host002#3635: 0x2b1e2e0229e1
<PMX_etherhxb_receive+417>:     add    
$0x3ff,%rdi
SCAN:a.out ＠ host002#3635: 0x2b1e2e0229e8
<PMX_etherhxb_receive+424>:     cmp    
%rdi,%rdx
SCAN:a.out ＠ host002#3635: **** Stack Back Trace ****
SCAN:a.out ＠ host002#3635:
SCAN:a.out ＠ host002#3635: Thread 1 (Thread 0x2b1e2db36670
(LWP 3635)):
SCAN:a.out ＠ host002#3635: #0  0x0000003e5fc0e380 in
__pause_nocancel () from 
/lib64/libpthread.so.0
SCAN:a.out ＠ host002#3635: No symbol table info available.
SCAN:a.out ＠ host002#3635: #1  0x00002b1e2d726ad5 in
__sc__attach_debugger 
(signal=11,
SCAN:a.out ＠ host002#3635:     ctxp=<value optimized out>)
at ../attach.c:137
SCAN:a.out ＠ host002#3635:         pc = 47408620906920
SCAN:a.out ＠ host002#3635:         pid_debuggee = -514
SCAN:a.out ＠ host002#3635:         pid_debugger = <value
optimized out>
SCAN:a.out ＠ host002#3635: #2  0x00002b1e2d726a7e in
score_exception_handler 
(signal=11, info=0x15ca1d70,
SCAN:a.out ＠ host002#3635:     ctx=0x15ca1c40) at
../attach.c:210
SCAN:a.out ＠ host002#3635:         errout = 0x3e5f351860
SCAN:a.out ＠ host002#3635: #3  <signal handler called>
SCAN:a.out ＠ host002#3635: No symbol table info available.
SCAN:a.out ＠ host002#3635: #4  0x00002b1e2e0229a8 in
PMX_etherhxb_receive ()
SCAN:a.out ＠ host002#3635:    from 
/opt/score/7.0.0//lib/obj.x86_64-rhel5-linux2_6/etherhxb.so
SCAN:a.out ＠ host002#3635: No symbol table info available.
SCAN:a.out ＠ host002#3635: #5  0x00002b1e2cc24819 in
comp_receive 
(pmc=0x2b1e2db37000,
SCAN:a.out ＠ host002#3635:     bufp=0x7fffa89724f0,
sizep=0x7fffa89724e8, 
descp=0x7fffa89724d8)
SCAN:a.out ＠ host002#3635:     at ../composite.c:2560
SCAN:a.out ＠ host002#3635: No locals.
SCAN:a.out ＠ host002#3635: #6  pmxReceive
(pmc=0x2b1e2db37000, 
bufp=0x7fffa89724f0, sizep=0x7fffa89724e8,
SCAN:a.out ＠ host002#3635:     descp=0x7fffa89724d8) at
../composite.c:2650
SCAN:a.out ＠ host002#3635:         err = 71
SCAN:a.out ＠ host002#3635: #7  0x00002b1e2c7e18ec in
MTMIT_BT_SCore_Recv ()
SCAN:a.out ＠ host002#3635:    from 
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host002#3635: No symbol table info available.
SCAN:a.out ＠ host002#3635: #8  0x00002b1e2c7dbc36 in
MTMIT_BT_Progress ()
SCAN:a.out ＠ host002#3635:    from 
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host002#3635: No symbol table info available.
SCAN:a.out ＠ host002#3635: #9  0x00002b1e2c7da4cb in
MTMI_TestAny ()
SCAN:a.out ＠ host002#3635:    from 
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host002#3635: No symbol table info available.
SCAN:a.out ＠ host002#3635: #10 0x00002b1e2c51f668 in
MPID_MTMI_progress ()
SCAN:a.out ＠ host002#3635:    from 
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host002#3635: No symbol table info available.
SCAN:a.out ＠ host002#3635: #11 0x00002b1e2c51f7cc in
MPID_Progress_wait ()
SCAN:a.out ＠ host002#3635:    from 
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host002#3635: No symbol table info available.
SCAN:a.out ＠ host002#3635: #12 0x00002b1e2c561e13 in
PMPI_Wait ()
SCAN:a.out ＠ host002#3635:    from 
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host002#3635: No symbol table info available.
SCAN:a.out ＠ host002#3635: #13 0x0000000000400f3e in main ()
SCAN:a.out ＠ host002#3635: No symbol table info available.

<15> SCORE: Program signaled (Segmentation fault).
[root ＠ server3 sc01]# scrun -nodes=15x1 -group=pcc ./a.out
SCore (7.0.0) Connected
SCORE{1} 15 nodes (15x1) ready.
A.OUT ＠ host003#5866 <><><><><<><> (no trace available)
<><><><><<><>
A.OUT ＠ host002#3790 <><><><><<><> (no trace available)
<><><><><<><>
SCAN:a.out ＠ host003#5867: ------ Scanning a.out#5867 ------
SCAN:a.out ＠ host002#3791: ------ Scanning a.out#3791 ------
SCAN:a.out ＠ host003#5867: [Thread debugging using
libthread_db enabled]
SCAN:a.out ＠ host002#3791: [Thread debugging using
libthread_db enabled]
SCAN:a.out ＠ host003#5867: 0x0000003aa960e380 in
__pause_nocancel () from 
/lib64/libpthread.so.0
SCAN:a.out ＠ host003#5867: **** Inspecting address:
0x2b9caf13f9a8 ****
SCAN:a.out ＠ host003#5867: 0x2b9caf13f978
<PMX_etherhxb_receive+312>:
SCAN:a.out ＠ host003#5867:     loopne 0x2b9caf13f989 
<PMX_etherhxb_receive+329>
SCAN:a.out ＠ host003#5867: 0x2b9caf13f97a
<PMX_etherhxb_receive+314>:     mov    
$0x73,%bh
SCAN:a.out ＠ host003#5867: 0x2b9caf13f97c
<PMX_etherhxb_receive+316>:     add    
$0x41,%al
SCAN:a.out ＠ host003#5867: 0x2b9caf13f97e
<PMX_etherhxb_receive+318>:     shr    
$0x10,%ecx
SCAN:a.out ＠ host003#5867: 0x2b9caf13f981
<PMX_etherhxb_receive+321>:     shl    
$0xe,%r8
SCAN:a.out ＠ host003#5867: 0x2b9caf13f985
<PMX_etherhxb_receive+325>:     mov    
%r13d,0x358(%r14)
SCAN:a.out ＠ host003#5867: 0x2b9caf13f98c
<PMX_etherhxb_receive+332>:     
movzbl %r9b,%ecx
SCAN:a.out ＠ host003#5867: 0x2b9caf13f990
<PMX_etherhxb_receive+336>:     and    
$0x1fffc000,%r8d
SCAN:a.out ＠ host003#5867: 0x2b9caf13f997
<PMX_etherhxb_receive+343>:     
movzwl 0x2(%rbx),%r14d
SCAN:a.out ＠ host003#5867: 0x2b9caf13f99c
<PMX_etherhxb_receive+348>:     add    
0x7d0(%rbp,%rcx,8),%r8
SCAN:a.out ＠ host003#5867: 0x2b9caf13f9a4
<PMX_etherhxb_receive+356>:     lea    
(%r8,%rsi,1),%rdx
SCAN:a.out ＠ host003#5867: 0x2b9caf13f9a8
<PMX_etherhxb_receive+360>:     cmp    
0x10(%rdx),%r14w
SCAN:a.out ＠ host003#5867: 0x2b9caf13f9ad
<PMX_etherhxb_receive+365>:
SCAN:a.out ＠ host003#5867:     je     0x2b9caf13fda1 
<PMX_etherhxb_receive+1377>
SCAN:a.out ＠ host003#5867: 0x2b9caf13f9b3
<PMX_etherhxb_receive+371>:     mov    
0x220(%rbp),%rcx
SCAN:a.out ＠ host003#5867: 0x2b9caf13f9ba
<PMX_etherhxb_receive+378>:     
addl   $0x1,0xd38(%rbp)
SCAN:a.out ＠ host003#5867: 0x2b9caf13f9c1
<PMX_etherhxb_receive+385>:     
movzwl 0x2(%rbx),%eax
SCAN:a.out ＠ host003#5867: 0x2b9caf13f9c5
<PMX_etherhxb_receive+389>:     mov    
(%rcx),%r10d
SCAN:a.out ＠ host003#5867: 0x2b9caf13f9c8
<PMX_etherhxb_receive+392>:     mov    
0x4(%rcx),%ebx
SCAN:a.out ＠ host003#5867: 0x2b9caf13f9cb
<PMX_etherhxb_receive+395>:     cmp    
%ebx,%r10d
SCAN:a.out ＠ host003#5867: 0x2b9caf13f9ce
<PMX_etherhxb_receive+398>:
SCAN:a.out ＠ host003#5867:     jb     0x2b9caf13fb10 
<PMX_etherhxb_receive+720>
SCAN:a.out ＠ host003#5867: 0x2b9caf13f9d4
<PMX_etherhxb_receive+404>:     mov    
(%rcx),%r14d
SCAN:a.out ＠ host003#5867: 0x2b9caf13f9d7
<PMX_etherhxb_receive+407>:     mov    
0x4(%rcx),%r11d
SCAN:a.out ＠ host003#5867: 0x2b9caf13f9db
<PMX_etherhxb_receive+411>:     mov    
%r11d,%edi
SCAN:a.out ＠ host003#5867: 0x2b9caf13f9de
<PMX_etherhxb_receive+414>:     mov    
%r14d,%edx
SCAN:a.out ＠ host003#5867: 0x2b9caf13f9e1
<PMX_etherhxb_receive+417>:     add    
$0x3ff,%rdi
SCAN:a.out ＠ host003#5867: 0x2b9caf13f9e8
<PMX_etherhxb_receive+424>:     cmp    
%rdi,%rdx
SCAN:a.out ＠ host003#5867: **** Stack Back Trace ****
SCAN:a.out ＠ host003#5867:
SCAN:a.out ＠ host003#5867: Thread 1 (Thread 0x2b9caec53670
(LWP 5867)):
SCAN:a.out ＠ host003#5867: #0  0x0000003aa960e380 in
__pause_nocancel () from 
/lib64/libpthread.so.0
SCAN:a.out ＠ host003#5867: No symbol table info available.
SCAN:a.out ＠ host003#5867: #1  0x00002b9cae843ad5 in
__sc__attach_debugger 
(signal=11,
SCAN:a.out ＠ host003#5867:     ctxp=<value optimized out>)
at ../attach.c:137
SCAN:a.out ＠ host003#5867:         pc = 47951952214440
SCAN:a.out ＠ host003#5867:         pid_debuggee = -514
SCAN:a.out ＠ host003#5867:         pid_debugger = <value
optimized out>
SCAN:a.out ＠ host003#5867: #2  0x00002b9cae843a7e in
score_exception_handler 
(signal=11, info=0x174e7d70,
SCAN:a.out ＠ host003#5867:     ctx=0x174e7c40) at
../attach.c:210
SCAN:a.out ＠ host003#5867:         errout = 0x3aa8d51860
SCAN:a.out ＠ host003#5867: #3  <signal handler called>
SCAN:a.out ＠ host003#5867: No symbol table info available.
SCAN:a.out ＠ host003#5867: #4  0x00002b9caf13f9a8 in
PMX_etherhxb_receive ()
SCAN:a.out ＠ host003#5867:    from 
/opt/score/7.0.0//lib/obj.x86_64-rhel5-linux2_6/etherhxb.so
SCAN:a.out ＠ host003#5867: No symbol table info available.
SCAN:a.out ＠ host003#5867: #5  0x00002b9cadd41819 in
comp_receive 
(pmc=0x2b9caec54000,
SCAN:a.out ＠ host003#5867:     bufp=0x7fff12f01500,
sizep=0x7fff12f014f8, 
descp=0x7fff12f014e8)
SCAN:a.out ＠ host003#5867:     at ../composite.c:2560
SCAN:a.oSCAN:a.out ＠ host002#3791: 0x0000003e5fc0e380 in
__pause_nocancel () 
from /lib64/libpthread.so.0
SCAN:a.out ＠ host002#3791: **** Inspecting address:
0x2b194f3d39a8 ****
SCAN:a.out ＠ host002#3791: 0x2b194f3d3978
<PMX_etherhxb_receive+312>:
SCAN:a.out ＠ host002#3791:     loopne 0x2b194f3d3989 
<PMX_etherhxb_receive+329>
SCAN:a.out ＠ host002#3791: 0x2b194f3d397a
<PMX_etherhxb_receive+314>:     mov    
$0x73,%bh
SCAN:a.out ＠ host002#3791: 0x2b194f3d397c
<PMX_etherhxb_receive+316>:     add    
$0x41,%al
SCAN:a.out ＠ host002#3791: 0x2b194f3d397e
<PMX_etherhxb_receive+318>:     shr    
$0x10,%ecx
SCAN:a.out ＠ host002#3791: 0x2b194f3d3981
<PMX_etherhxb_receive+321>:     shl    
$0xe,%r8
SCAN:a.out ＠ host002#3791: 0x2b194f3d3985
<PMX_etherhxb_receive+325>:     mov    
%r13d,0x358(%r14)
SCAN:a.out ＠ host002#3791: 0x2b194f3d398c
<PMX_etherhxb_receive+332>:     
movzbl %r9b,%ecx
SCAN:a.out ＠ host002#3791: 0x2b194f3d3990
<PMX_etherhxb_receive+336>:     and    
$0x1fffc000,%r8d
SCAN:a.out ＠ host002#3791: 0x2b194f3d3997
<PMX_etherhxb_receive+343>:     
movzwl 0x2(%rbx),%r14d
SCAN:a.out ＠ host002#3791: 0x2b194f3d399c
<PMX_etherhxb_receive+348>:     add    
0x7d0(%rbp,%rcx,8),%r8
SCAN:a.out ＠ host002#3791: 0x2b194f3d39a4
<PMX_etherhxb_receive+356>:     lea    
(%r8,%rsi,1),%rdx
SCAN:a.out ＠ host002#3791: 0x2b194f3d39a8
<PMX_etherhxb_receive+360>:     cmp    
0x10(%rdx),%r14w
SCAN:a.out ＠ host002#3791: 0x2b194f3d39ad
<PMX_etherhxb_receive+365>:
SCAN:a.out ＠ host002#3791:     je     0x2b194f3d3da1 
<PMX_etherhxb_receive+1377>
SCAN:a.out ＠ host002#3791: 0x2b194f3d39b3
<PMX_etherhxb_receive+371>:     mov    
0x220(%rbp),%rcx
SCAN:a.out ＠ host002#3791: 0x2b194f3d39ba
<PMX_etherhxb_receive+378>:     
addl   $0x1,0xd38(%rbp)
SCAN:a.out ＠ host002#3791: 0x2b194f3d39c1
<PMX_etherhxb_receive+385>:     
movzwl 0x2(%rbx),%eax
SCAN:a.out ＠ host002#3791: 0x2b194f3d39c5
<PMX_etherhxb_receive+389>:     mov    
(%rcx),%r10d
SCAN:a.out ＠ host002#3791: 0x2b194f3d39c8
<PMX_etherhxb_receive+392>:     mov    
0x4(%rcx),%ebx
SCAN:a.out ＠ host002#3791: 0x2b194f3d39cb
<PMX_etherhxb_receive+395>:     cmp    
%ebx,%r10d
SCAN:a.out ＠ host002#3791: 0x2b194f3d39ce
<PMX_etherhxb_receive+398>:
SCAN:a.out ＠ host002#3791:     jb     0x2b194f3d3b10 
<PMX_etherhxb_receive+720>
SCAN:a.out ＠ host002#3791: 0x2b194f3d39d4
<PMX_etherhxb_receive+404>:     mov    
(%rcx),%r14d
SCAN:a.out ＠ host002#3791: 0x2b194f3d39d7
<PMX_etherhxb_receive+407>:     mov    
0x4(%rcx),%r11d
SCAN:a.out ＠ host002#3791: 0x2b194f3d39db
<PMX_etherhxb_receive+411>:     mov    
%r11d,%edi
SCAN:a.out ＠ host002#3791: 0x2b194f3d39de
<PMX_etherhxb_receive+414>:     mov    
%r14d,%edx
SCAN:a.out ＠ host002#3791: 0x2b194f3d39e1
<PMX_etherhxb_receive+417>:     add    
$0x3ff,%rdi
SCAN:a.out ＠ host002#3791: 0x2b194f3d39e8
<PMX_etherhxb_receive+424>:     cmp    
%rdi,%rdx
SCAN:a.out ＠ host002#3791: **** Stack Back Trace ****
SCAN:a.out ＠ host002#3791:
SCAN:a.out ＠ host002#3791: Thread 1 (Thread 0x2b194eee7670
(LWP 3791)):
SCAN:a.out ＠ host002#3791: #0  0x0000003e5fc0e380 in
__pause_nocancel () from 
/lib64/libpthread.so.0
SCAN:a.out ＠ host002#3791: No symbol table info available.
SCAN:a.out ＠ host002#3791: #1  0x00002b194ead7ad5 in
__sc__attach_debugger 
(signal=11,
SCAN:a.out ＠ host002#3791:     ctxp=<value optimized out>)
at ../attach.c:137
SCAN:a.out ＠ host002#3791:         pc = 47387703589288
SCAN:a.out ＠ host002#3791:         pid_debuggee = -514
SCAN:a.out ＠ host002#3791:         pid_debugger = <value
optimized out>
SCAN:a.out ＠ host002#3791: #2  0x00002b194ead7a7e in
score_exception_handler 
(signal=11, info=0x190fdd70,
SCAN:a.out ＠ host002#3791:     ctx=0x190fdc40) at
../attach.c:210
SCAN:a.out ＠ host002#3791:         errout = 0x3e5f351860
SCAN:a.out ＠ host002#3791: #3  <signal handler called>
SCAN:a.out ＠ host002#3791: No symbol table info available.
SCAN:a.out ＠ host002#3791: #4  0x00002b194f3d39a8 in
PMX_etherhxb_receive ()
SCAN:a.out ＠ host002#3791:    from 
/opt/score/7.0.0//lib/obj.x86_64-rhel5-linux2_6/etherhxb.so
SCAN:a.out ＠ host002#3791: No symbol table info available.
SCAN:a.out ＠ host002#3791: #5  0x00002b194dfd5819 in
comp_receive 
(pmc=0x2b194eee8000,
SCAN:a.out ＠ host002#3791:     bufp=0x7fff27dd1160,
sizep=0x7fff27dd1158, 
descp=0x7fff27dd1148)
SCAN:a.out ＠ host002#3791:     at ../composite.c:2560
SCAN:a.out ＠ host003#5867: No locals.
SCAN:a.out ＠ host003#5867: #6  pmxReceive
(pmc=0x2b9caec54000, 
bufp=0x7fff12f01500, sizep=0x7fff12f014f8,
SCAN:a.out ＠ host003#5867:     descp=0x7fff12f014e8) at
../composite.c:2650
SCAN:a.out ＠ host003#5867:         err = 71
SCAN:a.out ＠ host003#5867: #7  0x00002b9cad8fe8ec in
MTMIT_BT_SCore_Recv ()
SCAN:a.out ＠ host003#5867:    from 
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host003#5867: No symbol table info available.
SCAN:a.out ＠ host003#5867: #8  0x00002b9cad8f8c36 in
MTMIT_BT_Progress ()
SCAN:a.out ＠ host003#5867:    from 
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host003#5867: No symbol table info available.
SCAN:a.out ＠ host003#5867: #9  0x00002b9cad8f7c55 in
MTMI_WaitEvent ()
SCAN:a.out ＠ host003#5867:    from 
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host003#5867: No symbol table info available.
SCAN:a.out ＠ host003#5867: #10 0x00002b9cad63c657 in
MPID_MTMI_progress ()
SCAN:a.out ＠ host003#5867:    from 
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host003#5867: No symbol table info available.
SCAN:a.out ＠ host003#5867: #11 0x00002b9cad63c7cc in
MPID_Progress_wait ()
SCAN:a.out ＠ host003#5867:    from 
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host003#5867: No symbol table info available.
SCAN:a.out ＠ host003#5867: #12 0x00002b9cad67ee13 in
PMPI_Wait ()
SCAN:a.out ＠ host003#5867:    from 
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host003#5867: No symbol table info available.
SCAN:a.out ＠ host003#5867: #13 0x0000000000400f3e in main ()
SCAN:a.out ＠ host003#5867: No symbol table info available.
ut ＠ host002#3791: No locals.
SCAN:a.out ＠ host002#3791: #6  pmxReceive
(pmc=0x2b194eee8000, 
bufp=0x7fff27dd1160, sizep=0x7fff27dd1158,
SCAN:a.out ＠ host002#3791:     descp=0x7fff27dd1148) at
../composite.c:2650
SCAN:a.out ＠ host002#3791:         err = 71
SCAN:a.out ＠ host002#3791: #7  0x00002b194db928ec in
MTMIT_BT_SCore_Recv ()
SCAN:a.out ＠ host002#3791:    from 
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host002#3791: No symbol table info available.
SCAN:a.out ＠ host002#3791: #8  0x00002b194db8cc36 in
MTMIT_BT_Progress ()
SCAN:a.out ＠ host002#3791:    from 
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host002#3791: No symbol table info available.
SCAN:a.out ＠ host002#3791: #9  0x00002b194db8b4cb in
MTMI_TestAny ()
SCAN:a.out ＠ host002#3791:    from 
/opt/score/7.0.0/mpi/libmtmi/obj.x86_64-rhel5-linux2_6/lib/libmtmi.so.1
SCAN:a.out ＠ host002#3791: No symbol table info available.
SCAN:a.out ＠ host002#3791: #10 0x00002b194d8d0668 in
MPID_MTMI_progress ()
SCAN:a.out ＠ host002#3791:    from 
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host002#3791: No symbol table info available.
SCAN:a.out ＠ host002#3791: #11 0x00002b194d8d07cc in
MPID_Progress_wait ()
SCAN:a.out ＠ host002#3791:    from 
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host002#3791: No symbol table info available.
SCAN:a.out ＠ host002#3791: #12 0x00002b194d912e13 in
PMPI_Wait ()
SCAN:a.out ＠ host002#3791:    from 
/opt/score/7.0.0/mpi/mpich2/x86_64-rhel5-linux2_6/1.2.1-ch_score-gnu/lib/libmpich.so.1.2
SCAN:a.out ＠ host002#3791: No symbol table info available.
SCAN:a.out ＠ host002#3791: #13 0x0000000000400f3e in main ()
SCAN:a.out ＠ host002#3791: No symbol table info available.

<2> SCORE: Program signaled (Segmentation fault).

(３)正常に処理された場合、(ただし1台のみでの実行)

**********************************
***１台に対して行った場合は正常***
**********************************
[root ＠ server3 sc01]# scrun -nodes=1x1 -group=pcc ./a.out
SCore (7.0.0) Connected
SCORE{1} One node ready.
time = 42.535520 seconds, iteration = 133, performance =
235.758105 MFLOPS
[root ＠ server3 sc01]# scrun -nodes=1x2 -group=pcc ./a.out
SCore (7.0.0) Connected
SCORE{1} 2 nodes (1x2) ready.
time = 31.004537 seconds, iteration = 133, performance =
323.439552 MFLOPS
[root ＠ server3 sc01]# scrun -nodes=1x3 -group=pcc ./a.out
SCore (7.0.0) Connected
SCORE{1} 3 nodes (1x3) ready.
time = 64.379530 seconds, iteration = 133, performance =
155.765250 MFLOPS
[root ＠ server3 sc01]# scrun -nodes=1x4 -group=pcc ./a.out
SCore (7.0.0) Connected
SCORE{1} 4 nodes (1x4) ready.
time = 74.913215 seconds, iteration = 133, performance =
151.415352 MFLOPS

以 上



--------------------------------------
Get the new Internet Explorer 8 optimized for Yahoo! JAPAN
http://pr.mail.yahoo.co.jp/ie8/


From kameyama ＠ pccluster.org  Mon Jan 24 10:45:48 2011
From: kameyama ＠ pccluster.org (Kameyama Toyohisa)
Date: Mon, 24 Jan 2011 10:45:48 +0900
Subject: [SCore-users-jp]
 =?iso-2022-jp?b?UE1YL0V0aGVySFhCIGRldmljZSBkcml2?=
 =?iso-2022-jp?b?ZXIgGyRCJE5AX0RqSn1LISRyNjUkKCRGJC8kQCQ1JCQhIxsoQg==?=
In-Reply-To: <20110123073416.25732.qmail@web2914.mail.tnz.yahoo.co.jp>
References: <20110123073416.25732.qmail@web2914.mail.tnz.yahoo.co.jp>
Message-ID: <4D3CD9CC.5060101@pccluster.org>

亀山です.

(01/23/11 16:34), 鈴木 陽介 Wrote:
> PMX/EtherHXB device driverの設定方法を教えてください。

確かもとの
    http://www.pccluster.org/pipermail/score-users-jp/2010-October/003608.html
は PMX/Ethernet の問題でしたが,
(直したのも PMX/Ethernet のほうです.)
使いたいのは PMX/EtherHXB ですか?

device driver は特別な設定は不要ですが, EtherHXB の場合は NIC も変更する
必要があります.
多分, 今回の場合はそこは通っているようですが...

> (1)ethernetのエラー
> 
> [root ＠ server3 ~]# pmxtest -network ethernet
> PMXTEST.EXE ＠ host002#5152<><><><><<><>  (no trace
> available)<><><><><<><>
> PMXTEST.EXE ＠ host002[0/1:0/1]#5152: ABORT open_context() at
> pmx.c:65  Invalid argument
> SCOUT(host002): Process 5152 terminated with an exception
> signal (9:Killed).

これでエラーが出るということはなんらかの network の
設定をしているのでしょうか?
環境変数 SCORE_MESSAGE を ALL:2 に設定することで
もう少し詳しいエラーがわかると思います.

ちなみに, etherhxb のテストをしたい場合は
    pmxtest -network etherhxb
のはずですが...

2)コンパイルエラー

コンパイルは通っているので実行エラーでは?

> [root ＠ server3 sc01]# scrun -nodes=16x1 -group=pcc ./a.out
> SCore (7.0.0) Connected

前の mail では 7.0.1 を install しようとしていたように思えましたが,
何故か 7.0.0 が起動されていますね...
こちらも SCORE_MESSAGE を設定することで, もう少し詳しい情報が
得られると思います.

Kameyama Toyohisa