[SCore-users-jp] Network Trunking機構の設定について

Yoshihiro ISHIKAWA yoshihiro551230 @ bc.wakwak.com
2003年 10月 20日 (月) 23:49:35 JST


SCoreメーリングリストの皆様


岩手大学工学研究科M1の石川と申します.

NICが2枚のNetwork Trunkingを使ったPCクラスタを
構築しようとしています.

マニュアルを参考にNetwork Trunkingの設定をして,
Point-to-Pointテストをしたところ,以下のようなメッセージが
出てきました.ethernet-1のところをethernetに変えると,
うまくいくのですが,ethernet-1やethernet-2にすると,うまく
いきません.何が原因でこのようになっているのか,お分かり
の方がいらっしゃいましたら,教えていただきたく思います.

===================================================
[root @ cluster2 sbin]# ./rpmtest cluster01 ethernet-1 -reply
pmOpenDevice: Cannot allocate memory(12)
===================================================

このときのscorehosts.dbは以下のようになっています.

== scorehosts.db ====================================
/* PM/Ethernet */
ethernet        type=ethernet \
/* PM/Ethernet */
ethernet        type=ethernet \
/* PM/Ethernet */
ethernet        type=ethernet \
                -config:file=/opt/score/etc/pm-ethernet.conf
ethernet-1      type=ethernet \
                -config:file=/opt/score/etc/pm-ethernet-1.conf
ethernet-2      type=ethernet \
                -config:file=/opt/score/etc/pm-ethernet-2.conf
ethernet-x2     type=ethernet \
                -config:file=/opt/score/etc/pm-ethernet-1.conf
                -trunk0:file=/opt/score/etc/pm-ethernet-2.conf

#define PCC     msgbserv=(cluster2.iwate-u.ac.jp:8764)

cluster2.iwate-u.ac.jp \
 network=ethernet,ethernet-1,ethernet-2,ethernet-x2,udp \
 group=_scoreall_,pccall smp=1 PCC
cluster01.iwate-u.ac.jp \
 network=ethernet,ethernet-1,ethernet-2,ethernet-x2,udp \
 group=_scoreall_,pccall smp=1 PCC
cluster02.iwate-u.ac.jp \
 network=ethernet,ethernet-1,ethernet-2,ethernet-x2,udp \
 group=_scoreall_,pccall smp=1 PCC
cluster03.iwate-u.ac.jp \
 network=ethernet,ethernet-1,ethernet-2,ethernet-x2,udp \
 group=_scoreall_,pccall smp=1 PCC
===================================================

マシンの構成は以下の通りです.

OS:Redhat Linux 8.0
SCore:5.4
CPU Pentium4 2.4CGHz
チップセット i865G
メモリ 2GB
eth0:オンボードIntel製100Base-TX
eth1:Tamarack TC9020A
eth2:Tamarack TC9020A
ノード数:4

SCoreはソースをコンパイルしてインストールし,eth1のみ
を使った場合に正常に動作することは確認しました.

また,eth0は使用せず,eth1とeth2でNetwork Trunkingをしようと
しています.

以上です.よろしくお願いいたします.

====================================
岩手大学大学院工学研究科機械工学専攻
航空宇宙システム部門/船崎・山田研究室
修士課程1年 石川慶拓 Yoshihiro Ishikawa
mail yoshihiro551230 @ bc.wakwak.com
====================================





SCore-users-jp メーリングリストの案内