[SCore-users-jp] scored (PM/UDP が動作しません)

[KATAYAMA Yoshio]

----Next_Part(Tue_Aug_12_22:46:13_2003_464)--
Content-Type: Text/Plain; charset=iso-2022-jp
Content-Transfer-Encoding: 7bit

PFU の片山です。
お世話になっております。

From: KATAYAMA Yoshio <kate ＠ pfu.fujitsu.com>
Subject: Re: [SCore-users-jp] PM/UDP が動作しません
Date: Mon, 04 Aug 2003 11:48:39 +0900 (JST)

> ただし、マルチユーザモードでは、sc_console を起動するとサーバと
> なっている計算ノードで SIGSEGV が発生し、sc_console のコマンドが
> 受け付けられません。この問題はまだ状況を確認中ですので、もう少し
> 調査してから報告させて戴きます。

PM_DEBUG=8 で scored を起動して、すぐに sc_console を行なった時
のログです。メッセージからすると SIGSEGV が発生しているようです。

環境は RedHat 8.0 + SCore 5.4 です。

SCore を make する時の configure には --prefix=/opt/score5.4.0
を付けています。

何を調べればよいのか分からず、手詰りになっています。
--
(株)ＰＦＵ　第二システム統括部　Ｌｉｎｕｘシステム部
片山　善夫
Tel 044-520-6617  Fax 044-556-1022

----Next_Part(Tue_Aug_12_22:46:13_2003_464)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename=LOG

ethernet_open_device(): -config /var/scored/scoreboard/clust.0000B3002Jk7
ethernet_open_device(): -config /var/scored/scoreboard/clust.0000B3002Jk7
pmEthernetOpenDevice: Library version
  $Id: pm_ethernet.c,v 1.64 2002/03/04 09:44:42 s-sumi Exp $
pmEthernetReadConfig(0x85a8cb8, unit, 0): set unit number "0" (MAX: 4).
pmEthernetReadConfig(0x85a8cb8, maxnsend, 24): set maxnsend "24".
pmEthernetReadConfig(0x85a8cb8, backoff, 2400): set backoff "2400" usec.
pmEthernetReadConfig(0x85a8cb8, checksum, 0): set checksum "0" off.
pmEthernetGetNodeByNumber(0x85a8cb8, 0, 0xbffff158): not found
pmEthernetGetNodeByNumber(0x85a8cb8, 0, 0xbffff154): not found
  store host 00:02:B3:B2:EE:FC: dev{0] mac 0x00000002b3b2eefc
pmEthernetGetNodeByNumber(0x85a8cb8, 1, 0xbffff158): not found
pmEthernetGetNodeByNumber(0x85a8cb8, 1, 0xbffff154): not found
  store host 00:02:B3:B2:EE:46: dev{0] mac 0x00000002b3b2ee46
pmEthernetOpenDevice("/var/scored/scoreboard/clust.0000B3002Jk7", 0xbffff614): pmEthernetMapEthernet(0, 0xbffff468): 0
Ethernet(0): fd=512
self comp2.beri.or.jp n 0 of 2 nodes 
pm_ethernetCalibrateTimer(): loop t:3.805141e+07, vt: 1.902900e-02
pmEthernetOpenDevice: Library version
  $Id: pm_ethernet.c,v 1.64 2002/03/04 09:44:42 s-sumi Exp $
pmEthernetReadConfig(0x85a8cb8, unit, 0): set unit number "0" (MAX: 4).
pmEthernetReadConfig(0x85a8cb8, maxnsend, 24): set maxnsend "24".
pmEthernetReadConfig(0x85a8cb8, backoff, 2400): set backoff "2400" usec.
pmEthernetReadConfig(0x85a8cb8, checksum, 0): set checksum "0" off.
pmEthernetGetNodeByNumber(0x85a8cb8, 0, 0xbffff158): not found
pmEthernetGetNodeByNumber(0x85a8cb8, 0, 0xbffff154): not found
  store host 00:02:B3:B2:EE:FC: dev{0] mac 0x00000002b3b2eefc
pmEthernetGetNodeByNumber(0x85a8cb8, 1, 0xbffff158): not found
pmEthernetGetNodeByNumber(0x85a8cb8, 1, 0xbffff154): not found
  store host 00:02:B3:B2:EE:46: dev{0] mac 0x00000002b3b2ee46
pmEthernetOpenDevice("/var/scored/scoreboard/clust.0000B3002Jk7", 0xbffff614): pmEthernetMapEthernet(0, 0xbffff468): 0
Ethernet(0): fd=512
self comp3.beri.or.jp n 1 of 2 nodes 
pm_ethernetCalibrateTimer(): loop t:3.800225e+07, vt: 1.900700e-02
pm_ethernetCalibrateTimer(): loop t:3.995259e+07, vt: 1.998100e-02
pm_ethernetCalibrateTimer(): end loop t:3.995259e+07, vt: 1.998100e-02
pm_ethernetCalibrateTimer(): d0:1.999382e+09, d1:1.999529e+09
pm_ethernetCalibrateTimer(): clk:1999, clock 1.999456e+03
pmEthernetOpenDevice: Driver version
  $Id: pm_ethernet_dev.c,v 1.4 2003/02/03 03:11:42 kameyama Exp $
ethernet_open_device(): success
[0](0) PM/Ethernet CTX map Ctx(0x85aa008): send=0x4003a000, recv=0x4005a000, shared=0x40000000 success
[1](0)pmEthernetRegisterProc(): proc 1676(1676), tid 1676 
[1](0) pmEthernetAssociateNodes(0x85aa008, 0x823a3e0, 2):ndev=1
[1](0) pmEthernetBindChannel(0x85aa008, 0, 15): called
pm_ethernetCalibrateTimer(): loop t:3.995405e+07, vt: 1.998100e-02
pm_ethernetCalibrateTimer(): end loop t:3.995405e+07, vt: 1.998100e-02
pm_ethernetCalibrateTimer(): d0:1.999654e+09, d1:1.999602e+09
pm_ethernetCalibrateTimer(): clk:1999, clock 1.999628e+03
pmEthernetOpenDevice: Driver version
  $Id: pm_ethernet_dev.c,v 1.4 2003/02/03 03:11:42 kameyama Exp $
ethernet_open_device(): success
[0](0) PM/Ethernet CTX map Ctx(0x85aa008): send=0x4003a000, recv=0x4005a000, shared=0x40000000 success
[0](0)pmEthernetRegisterProc(): proc 1767(1767), tid 1767 
[0](0) pmEthernetAssociateNodes(0x85aa008, 0x823a3e0, 2):ndev=1
[0](0) pmEthernetBindChannel(0x85aa008, 0, 15): called
SYSLOG: /opt/score5.4.0/deploy/scored
SYSLOG: SCore-D 5.4.0 $Id: init.cc,v 1.68 2002/10/31 08:43:01 kameyama Exp $
SYSLOG: Compile option(s): 
SYSLOG: SCore-D network: ethernet1/ethernet
SYSLOG: Cluster[0]: (0..1)x1.i386-redhat8-linux2_4.pentium4.2000
SYSLOG:   Memory: 1002[MB], Swap: 2048[MB], Disk: 5042[MB]
SYSLOG:   Network[0]: ethernet1/ethernet
SYSLOG: Scheduler initiated: Timeslice = 500 [msec]
SYSLOG:   Queue[0] activated, exclusive scheduling
SYSLOG:   Queue[1] activated, time-sharing scheduling
SYSLOG:   Queue[2] activated, time-sharing scheduling
SYSLOG: Session ID: 0
SYSLOG: Server Host: comp3.beri.or.jp
SYSLOG: Backup Host: comp2.beri.or.jp
SYSLOG: Operated by: root
SYSLOG: ========= SCore-D (5.4.0) bootup in SECURE MODE ========
<1> ULT: Exception Signal (11)


----Next_Part(Tue_Aug_12_22:46:13_2003_464)----